-
C792
Overview
The C792 is an HDMI to CSI-2 converter module with HDMI loop out that supports I2S audio output.
The HDMI input supports up to 4K 60Hz, and the HDMI loop out screen is consistent with the HDMI input screen.
CSI-2 output support up to 1080p 60Hz (4K screen will be automatically scaled to 1080p, the refresh rate remains unchanged).
Hardware Parameters
Model: C792
Compatible with Raspberry Pi 5B/4B//3B/Zero/CM5/CM4
HDMI input: supports up to 1080P60Hz on Raspberry Pi (Only when use with CM4 /CM5/ Pi 5B)
HDMI to CSI-2 bridge chip:Toshiba TC358743XBG
2 CSI-2 channels & clock (Pi 4B/3B and Pi Zero only support 2 lan, max 1080P1080p50Hz, and Pi CM4 /CM5/ 5B can support 4 lan, max 1080P1080p60Hz)
The CSI-2 interface, with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C792 module.
The CSI-2 interface, with 22 pin FPC seat, spacing 0.5 mm, is located on the back of the C792 module.
Size: 56 x 56 mm
Power supply:5V
Weight: 25g
Packing List
- 1 x C790 HDMI to CSI-2 Module
- 1 x 5V power cable
- 1 x 15cm Length FPC 15pin 1.0mm cable (for Pi 4B / 3B / Pi Zero)
- 1 x 15cm Length FPC 22pin 0.5mm cable (for Pi 5B / CM5 / CM4)
- 1 x I2S cable
User Manual
- Due to the absence of hardware encoding on the Pi 5B, the software usage instructions for Pi platforms are currently divided into two sections: Pi 5B configuration and configuration for other Pi platforms.
- In platforms such as Zero, Zero 2, Pi 3B, Pi 4B, etc., there is a reference for testing HDMI to CSI module demo： C779-Software or Raspberry pi official forum post
- Pi 5B platforms HDMI to CSI module test demo reference： CSI Manual on Pi 5
- Refer to: https://wiki.blicube.com/blikvm/en/hdmi-csi-i2s/
<comments />
FAQ
Q1: Question 1
A: Place the answer here.
<comments />