Main public logs

Combined display of all available logs of Geekworm Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

02:00, 9 June 2020 71.192.181.102 talk performed unknown action "comments/add" on X735 (I upgraded to the X728 and it does not cooperate at all with the X735 script, when i startup this script automatically shuts it down. How do i completely uninstall this script so i can install X728 Script)
02:02, 20 May 2020 83.46.234.177 talk performed unknown action "comments/add" on X735 (I bought two x828 boards and a x735 board for my raspberry pi 4 to connect two hard disks, a Samsung evo 860 (SSD) and a Seagate barracuda (HDD). I've followed the instructions in the videos to assemble all boards with the raspberry and disks and everything works properly except when I want to reboot the system with the command: sudo reboot. The system shuts down but but it doesn't restart and I have to unplug the power adapter to reboot the system. I've tried the raspberry only with x735...)
08:20, 13 May 2020 67.20.41.30 talk performed unknown action "comments/add" on X735 (ok. I have debugged this setup to this point. GPIO4 is the input from the x735 pertaining to the pressing and duration of the press for the power button. GPIO18 is the output from the Pi board to the x735 to power off. The problem I am seeing is with GPIO17's output. GPIO, in the script is labelled as "BOOT", but I am having an issue following the logic pertaining to the output. I can manually toggle it, and nothing happens. This is where I feel is the disconnect users are having with...)
15:45, 14 April 2020 Cindy talk contribs performed unknown action "comments/add" on X735 (Hi friend, Sorry, I'm a little confused, could you please contact us by email also use some photo to show your description? When use the X820 with X735, the power supply should be connected to X735. Thanks! Best regards, Cindy/Geekworm)
23:23, 13 April 2020 80.215.87.7 talk performed unknown action "comments/add" on X735 (What happens if I connect the power supply from the output port X735 to the output x820 XH2.54 5v out, then I connect the power supply to the x735. The x820 card would be properly powered?)
15:37, 13 April 2020 Cindy talk contribs performed unknown action "comments/add" on X735 (Hi friend, Sorry, no, it is not support to check the fan speed by software.But if you have the DIY skills, the engineer can told you how to change the Components to adjust the fan speed.)
06:57, 13 April 2020 77.126.89.86 talk performed unknown action "comments/add" on X735 (The auto cooling dosn't work! The fan runs allways in fullspeed and very loud. Is there a script to control the speed? Or to check the temperature?)
17:06, 7 April 2020 Cindy talk contribs performed unknown action "comments/add" on X735 (Hi, maybe you can refer to here X856#Some_Tips to get some information.)
23:38, 5 April 2020 65.130.195.127 talk performed unknown action "comments/add" on X735 (As other's have said the script doesn't seem like the best way to do this. Is there a better script to do this? This thing is eating up CPU.)
11:05, 24 March 2020 113.87.13.94 talk performed unknown action "comments/add" on X735 (Thanks.)
10:59, 7 March 2020 Admin talk contribs performed unknown action "comments/add" on X735 (Hi, Could you tell me what kind of power adapter you are using? Almost all electronic equipment has a voltage drop)
00:44, 6 March 2020 155.178.180.14 talk performed unknown action "comments/add" on X735 (Everything was working fine, but recently the low power lightning bolt started showing up. My pi 4 starts just fine without the x735 and no lightning bolt so it is not my power supply. Why is the x735 just now saying it has low power?)
15:45, 21 February 2020 Admin talk contribs performed unknown action "comments/add" on X735 (Hi, What version do you have? You can attach your order number and contact us with support@geekworm.com. Thanks! Best regards, Cindy/Geekworm)
14:20, 24 January 2020 95.90.203.143 talk performed unknown action "comments/add" on X735 (My fan runs allways in fullspeed, why the auto cooling dosn't work?)
05:34, 20 December 2019 88.74.160.189 talk performed unknown action "comments/add" on X735 (I have now been actively testing the software. The background script is taking 13% CPU on a Raspberry Pi 4! And a load of above 2 consistently. Sorry, but this software really is a terrible solution and I would recommend no one to run it.)
01:56, 19 December 2019 84.60.61.90 talk performed unknown action "comments/add" on X735 (I can confirm my PCF8563 RTC is working)
01:54, 9 December 2019 72.200.216.247 talk performed unknown action "comments/add" on X735 (I have a DSD3231 real time clock that doesn't appear to work when plugged in to the X735. I think that sharing pin 7 (GPIO 4) may be the issue. Have you tested the X735 with any RTC boards?)
05:24, 2 December 2019 88.69.42.193 talk performed unknown action "comments/add" on X735 (The provided script seems like a bunch of dirty hacks, leaving stuff running in the background all the time. Wouldn't it be better to use udev rules and triggerhappy?)
07:57, 4 October 2019 75.139.65.103 talk performed unknown action "comments/add" on X735 (Is there a way to turn off the usage of GPIO18 if I don't care about power management and let the fan run at full speed all the time? It's the only pin in conflict with the Fe-Pi audio board. As is it now it is powering everything off when the audio ca...)
08:04, 29 August 2019 189.33.91.253 talk performed unknown action "comments/add" on X735 (I recently posted a video showing how to make it compatible with the shutdown menu from Kodi https://youtu.be/9AfqLgfUKz8)
12:40, 28 August 2019 46.200.20.37 talk performed unknown action "comments/add" on X735 (on Raspbian)
15:17, 1 August 2019 210.156.168.245 talk performed unknown action "comments/add" on X735 (I purchased the case with the X735 and X850.Safe shutdown on SSD startup is now possible.The setting used X730 x730.sh and made a little correction of the setting referring to Customer Video: https://youtu.be/rcPbe4wyYbs.Why does the manufacturer not s...)
21:04, 15 June 2019 179.209.194.139 talk performed unknown action "comments/add" on X735 (is the kodi installed on the Retropie? or only on rasbian?)
14:39, 10 June 2019 Admin talk contribs performed unknown action "comments/add" on X735 (Hello friend, We test this shell script base official Raspbian '2018-11-13-raspbian-stretch.img' version;other operating systems not be tested!)
22:32, 8 June 2019 92.52.137.48 talk performed unknown action "comments/add" on X735 (Hi, I use Raspbian+Kodi on 3B+ + X735. How to add in the shutdown menu Kodi script X730shutdown.sh?)
17:33, 5 June 2019 189.40.75.117 talk performed unknown action "comments/add" on X735 (I'm glad your board is working ok tho. I recommend you to contact GeekWorm by email, to see if they can help you out now that it's clear that the X850 is not fully compatible with the X735. I would like to also share an idea. You can make a hole on t...)
07:37, 5 June 2019 96.32.232.110 talk performed unknown action "comments/add" on X735 (Well creating a Frankenstein cable isn't really an option unless I want to keep the top to the case off, which I don't. The cable has no way to pas trough from internal to an external micro USB port. I bought the case so all the parts would be enclosed...)
17:23, 4 June 2019 189.40.91.10 talk performed unknown action "comments/add" on X735 (What I recommend for a last attempt is to test only the rasp(with a sdcard) + X735. If possible. Because I'm starting to think that the X850 is not fully compatible with the X735. Even that you have a 5v 4a power adapter connected to the X735, it's st...)
17:22, 4 June 2019 189.40.91.10 talk performed unknown action "comments/add" on X735 (What I recommend for a last attempt is to test only the rasp(with a sdcard) + X735. If possible. Because I'm starting to think that the X850 is not fully compatible with the X735. Even that you have a 5v 4a power adapter connected to the X735, it's st...)
10:28, 4 June 2019 96.32.232.110 talk performed unknown action "comments/add" on X735 (I see no difference in these instructions or the shell script from what I have already installed. I compared the scripts and the one on github now is the same as I have already run. It would be helpful if the script was commented when changes are made...)
10:25, 4 June 2019 96.32.232.110 talk performed unknown action "comments/add" on X735 (I see mo difference in these instructions or the shell script from what I have already installed. I compared the scripts and the one on github now is the same as I have already run. It would be helpful if the script was commented when changes are made...)
14:51, 3 June 2019 Admin talk contribs performed unknown action "comments/add" on X735 (Hi, We have do some update, please refer to Hardware and Software link at: http://www.raspberrypiwiki.com/index.php/X735#Document for more details, thank you!)
06:28, 2 June 2019 96.32.232.110 talk performed unknown action "comments/add" on X735 (The mSATA SSD is a relatively small Samsung 850 EVO 120GB MZ-M5E120BW. the power supply is a SMAKN DC 5V/4A 20W Switching Power Supply with a 5525 male jack. The system boots up fine from a cold start pressing the momentary switch. It is after a moment...)
22:09, 1 June 2019 179.209.194.139 talk performed unknown action "comments/add" on X735 (Now that the we are sure the scripts and switches are ok. Let me ask you another thing, what is the power supply you are using? I am making this question because when it comes to usb booting, the sdd/hdd must have enough energy to turn itself on an...)
20:10, 1 June 2019 96.32.232.110 talk performed unknown action "comments/add" on X735 (OK so I checked both the latching switch positions and it turns out the white one was in the down position. I changed it to the up position but the behavior did not change. Using "sudo x730shutdown.sh" does work to shut down the system and power off, b...)
16:51, 31 May 2019 179.209.194.139 talk performed unknown action "comments/add" on X735 (Let's just make some last tests Try to remove the X850, connect the x735 to the GPIO and be sure that both of the latching switches are up(the one with the white tap and the one next to the micro usb entrance). For the power switch(the on from the met...)
09:57, 31 May 2019 96.32.232.110 talk performed unknown action "comments/add" on X735 (I checked and verified the followng: 1. /etc/rc.local the last line is "/etc/x730pwr.sh &" 2. "x730pwr.sh" exists in /etc/ 3. "x730shutdown.sh" exists in /usr/local/bin/ 4. I ran "sudo apt-get install rpi.gpio" ind it installed successfully. If I hol...)
03:23, 30 May 2019 179.209.194.139 talk performed unknown action "comments/add" on X735 (Hi, So when you shutdown, how do you do it? By pressing the button for more then 3 secs or do you select shutdown in the menu? In case you are shutting it down by using Retropie, so this is the reason it is not working. But, the switch should be work...)
10:10, 28 May 2019 96.32.232.110 talk performed unknown action "comments/add" on X735 (I purchased the x735 and x850 and the metal case. I have followed the instructions above in this Wiki exactly to install the shutdown script. When I shutdown my Pi 3 B+ the system shuts off but the board does not power down. Also when I reboot it acts...)
09:31, 20 May 2019 Admin talk contribs performed unknown action "comments/add" on X735 (Hello sir, 1. Please send us your order number and item link to support@geekworm.com. 2.Please also attach some photos or a video to show the details, thank you. 3.Please try to not used the momentary switch but use the on board power button to have a...)
20:56, 19 May 2019 174.231.135.46 talk performed unknown action "comments/add" on X735 (I am using momentary switch and after 1-2 seconds of holding the power button it is supposed to reboot but instead it instantly shuts off. 1. not rebooting 2. because it is not rebooting and instantly turning off I suspect its a forceful shutdown.)
15:16, 17 May 2019 Admin talk contribs performed unknown action "comments/add" on X735 (Hello, Could you please what project do you need to use? Maybe you can contact us with support@geekworm,com for more destails. Best regards, Cindy)
19:20, 15 May 2019 86.134.26.26 talk performed unknown action "comments/add" on X735 (We need function in software to power off then power on after maybe 10 seconds. Reboot not sufficient to reset some USB devices. Power off/on cycle triggered by software and HW watchdog. Must be remote, not manual press switch. Do you have product to d...)
11:17, 10 May 2019 Admin talk contribs performed unknown action "comments/add" on X735 (Hello, your method is not suggest because power supply for X820 cannot be controlled by X735 and safe shutdown won't be implemented as well. Best regards, Cindy)
11:16, 10 May 2019 Admin talk contribs performed unknown action "comments/add" on X735 (Hello sir, The GPIO4, GPIO17 and GPIO18 is used for power management.The rest is available for use. Best regards, Cindy)
09:13, 10 May 2019 Admin talk contribs performed unknown action "comments/add" on X735 (Hello, When istall the X735, you can power from the X735 board DC port by the power supply to X820 board by connect the 2pin cable as in the right photo of X735+X820 board.This is rigt way to power the kit. Thanks very much for your understanding! Best...)
00:09, 8 May 2019 189.51.183.52 talk performed unknown action "comments/add" on X735 (what are the GPIOs used in the script? Because I have some being used in other scripts and I didn't want them to conflict)
16:11, 6 May 2019 189.40.73.146 talk performed unknown action "comments/add" on X735 (What if I connect the x820 XH2.54 5v to the IN of the X735, and then connect the power supply to the x820. Will the safe sh work?)
19:20, 5 May 2019 Admin talk contribs performed unknown action "comments/add" on X735 (Hello sir, Yes, you are right, we will attched the photos of raspberry pi and X820 and X735 board later.)
06:33, 1 May 2019 179.209.194.139 talk performed unknown action "comments/add" on X735 (to make the safe shutdown work. do I have to connect the x820 by the XH2.54 2Pin Cable to the x735 and connect the power supply to the x735?)