N300

Ultra Thin Alu-Case for PI 4B

Ultra Thin Alu-Case for PI 4B

Ultra Thin Alu-Case for PI 4B

Overview

This is a Raspberry Pi 4 aluminum case - ultra-thin aluminum alloy metal protective CNC Case that specially designed for Raspberry Pi 4 Model B, which compatible with Raspberry Pi 4 Model B 1GB/2GB/4GB Versions, use this Pi 4 case you can have easy access to all ports and slots of your Raspberry Pi 4B. At the buttom of this pi 4 b case there are regular bump design not flat for better heat dissaption. It is a good raspberry pi 4 passive cooling case.

Features

• Model: N300
• Whole aluminum alloy CNC processing, sand blasting, anodizing
• Ultra-thin with ONLY 16mm thickness
• Add 5mm thick heat sink at the bottom to enhance the case heat dissipation and protect Raspberry Pi 4B from overheating
• With black acrylic translucent plate to maximize compatibility with WiFi and Bluetooth signals, almost no weakness
• The Pi 4B indicators is visiable after installation
• Access to all ports of Raspberry Pi 4 Model B
• Prepared with 4 rubber feets to stable the case and not easy to scratch
• The Raspberry Pi 4B GPIO pin is avaiable for other application
• Please remove double-sided protective films of thin thermal pad and place them on postiton of the CPU/RAM chip.
• The thick thermal pad should be place at the bottom cover for thermal conduction

Packing List

• 1 x N300 Aluminum Case
• 1 x 2mm thermal pad - for bottom cover
• 1 x 1mm thermal pad - for CPU & RAM chips
• 1 x Acrylic Panel
• 4 x Rubber Pads
• 8 x Spacers M2.5*5+4mm M/F
• 4 x Screws M2.5*4mm
• 1 x Allen Wrench

Installation Guide

Installation Video:https://youtu.be/xYz7r1ffjjg

FAQ

Q1: Can you use thermal paste instead of the supplied thermal pad?

A: this is very creative, but if you just use thermal paste, it is not appropriate. You can use a about 2mm thickness copper pad and thermal paste，this way you will get better heat dissipation, Because the thermal conductivity of copper is much better than thermal paste or thermal pad.