T100: Difference between revisions
| Line 39: | Line 39: | ||
*Intelligent power management - Automatic powering off when system shutdown | *Intelligent power management - Automatic powering off when system shutdown | ||
*USB bus-powered or powered by external power adapter | *USB bus-powered or powered by external power adapter | ||
|- | |- | ||
| POWER SUPPLY || | | POWER SUPPLY || | ||
*Power supply via DC jack: 5VDC ±5%. | |||
*A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down.THIS IS VERY IMPORTANT!! | |||
|- | |- | ||
| I/O PORTS || 5 | | I/O PORTS || | ||
*USB Type-C socket x 1 | |||
*DC Jack??5.5x2.1mm x 1 | |||
*67Pin M.2 connector P=0.5mm, H3.2mm, Key M x1 | |||
|- | |- | ||
| DIMENSION || | | DIMENSION || | ||
*PCB Size: 100mm x 79mm | |||
|- | |- | ||
| NOTE || | | NOTE || | ||
*NVMe SATA SSD is not included | |||
*Only Compatible with NVMe M.2 SSDs | |||
*Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices | |||
*As with all SSDs, new media must be formatted before use | |||
*Performance depends on host system, workload, and SSD media used | |||
*SSD will run hot when it is under heavy load | |||
*Older SSD drives with less efficient flash media may not perform as well as newer drives | |||
|} | |} | ||