|
|
| Line 18: |
Line 18: |
| ==Features== | | ==Features== |
| {| class="wikitable" | | {| class="wikitable" |
| ! ITEM !! DESCRIPTION | | ! ITEM !! Jetson Nano |
| |- | | |- |
| | FOR USE WITH || Jetson Nano | | | FOR USE WITH || 1 |
| |- | | |- |
| | OPERATING SYSTEM || All operating systems | | | OPERATING SYSTEM || 2 |
| |- | | |- |
| | KEY FEATURES || "Ideal storage solution for Jetson Nano - M.2 NVMe SSD Shield | | | KEY FEATURES || 3 |
| |- | | |- |
| | Supports up to 2TB M.2 NVMe SSD solid-state drives | | | POWER SUPPLY || 4 |
| |- | | |- |
| | Supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230 | | | I/O PORTS || 5 |
| |- | | |- |
| | Integrated USB 3.1 Gen2 to PCIe Gen3x2 10Gb/s bridge controller | | | DIMENSION || 6 |
| |- | | |- |
| | USB3.1 Gen1 connectivity offers plug-and-play functionality on your Jetson Nano
| | | NOTE || 7 |
| |-
| |
| | ?We just weld the mounting copper column on the 2280 place, 2260, 2242, 2230 are also supported, but you need to prepare a 6.7mm mounting copper column if your ssd is 2260/2242/2230.
| |
| |-
| |
| | Quick data transfer with high-speed USB3.1 Gen1 5Gb/s or Gen2 10Gb/s connectivity from a PC
| |
| |-
| |
| | With SSD LED blue indicator
| |
| |-
| |
| | On-board DC jack allows external power supply for high capacity SSD (Max 11.5Watts)
| |
| |-
| |
| | One power adapter to power both T100 and Jetson Nano - 1 Female to 2 Male DC cable supplied
| |
| |-
| |
| | Intelligent power management - Automatic powering off when system shutdown
| |
| |-
| |
| | USB bus-powered or powered by external power adapter
| |
| |-
| |
| | "
| |
| |-
| |
| | POWER SUPPLY || "Power supply via DC jack: 5VDC ±5%.
| |
| |-
| |
| | A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down.THIS IS VERY IMPORTANT!!
| |
| |-
| |
| | "
| |
| |-
| |
| | I/O PORTS || "USB Type-C socket x 1
| |
| |-
| |
| | DC Jack??5.5x2.1mm x 1
| |
| |-
| |
| | 67Pin M.2 connector P=0.5mm, H3.2mm, Key M x1"
| |
| |-
| |
| | DIMENSION || PCB Size: 100mm x 79mm
| |
| |-
| |
| | NOTE || "NVMe SATA SSD is not included | |
| |-
| |
| | Only Compatible with NVMe M.2 SSDs
| |
| |-
| |
| | Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
| |
| |-
| |
| | As with all SSDs, new media must be formatted before use
| |
| |-
| |
| | Performance depends on host system, workload, and SSD media used
| |
| |-
| |
| | SSD will run hot when it is under heavy load
| |
| |-
| |
| | Older SSD drives with less efficient flash media may not perform as well as newer drives"
| |
| |} | | |} |
| | |
| ==Features== | | ==Features== |
| <html> | | <html> |