T100: Difference between revisions
No edit summary |
|||
| Line 16: | Line 16: | ||
<span style="color:red;">Note: We received some feedback that NVME SSD does not support booting from USB.</span> | <span style="color:red;">Note: We received some feedback that NVME SSD does not support booting from USB.</span> | ||
==Features== | |||
{| class="wikitable" | |||
! ITEM !! DESCRIPTION | |||
|- | |||
| FOR USE WITH || Jetson Nano | |||
|- | |||
| OPERATING SYSTEM || All operating systems | |||
|- | |||
| KEY FEATURES || "Ideal storage solution for Jetson Nano - M.2 NVMe SSD Shield | |||
|- | |||
| Supports up to 2TB M.2 NVMe SSD solid-state drives | |||
|- | |||
| Supports multiple M.2 NVMe SSD lengths including: 2280, 2260, 2242, 2230 | |||
|- | |||
| Integrated USB 3.1 Gen2 to PCIe Gen3x2 10Gb/s bridge controller | |||
|- | |||
| USB3.1 Gen1 connectivity offers plug-and-play functionality on your Jetson Nano | |||
|- | |||
| ?We just weld the mounting copper column on the 2280 place, 2260, 2242, 2230 are also supported, but you need to prepare a 6.7mm mounting copper column if your ssd is 2260/2242/2230. | |||
|- | |||
| Quick data transfer with high-speed USB3.1 Gen1 5Gb/s or Gen2 10Gb/s connectivity from a PC | |||
|- | |||
| With SSD LED blue indicator | |||
|- | |||
| On-board DC jack allows external power supply for high capacity SSD (Max 11.5Watts) | |||
|- | |||
| One power adapter to power both T100 and Jetson Nano - 1 Female to 2 Male DC cable supplied | |||
|- | |||
| Intelligent power management - Automatic powering off when system shutdown | |||
|- | |||
| USB bus-powered or powered by external power adapter | |||
|- | |||
| " | |||
|- | |||
| POWER SUPPLY || "Power supply via DC jack: 5VDC ±5%. | |||
|- | |||
| A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down.THIS IS VERY IMPORTANT!! | |||
|- | |||
| " | |||
|- | |||
| I/O PORTS || "USB Type-C socket x 1 | |||
|- | |||
| DC Jack??5.5x2.1mm x 1 | |||
|- | |||
| 67Pin M.2 connector P=0.5mm, H3.2mm, Key M x1" | |||
|- | |||
| DIMENSION || PCB Size: 100mm x 79mm | |||
|- | |||
| NOTE || "NVMe SATA SSD is not included | |||
|- | |||
| Only Compatible with NVMe M.2 SSDs | |||
|- | |||
| Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices | |||
|- | |||
| As with all SSDs, new media must be formatted before use | |||
|- | |||
| Performance depends on host system, workload, and SSD media used | |||
|- | |||
| SSD will run hot when it is under heavy load | |||
|- | |||
| Older SSD drives with less efficient flash media may not perform as well as newer drives" | |||
|} | |||
==Features== | ==Features== | ||
<html> | <html> | ||