X1207: Difference between revisions
| Line 22: | Line 22: | ||
==Features== | ==Features== | ||
{| class="wikitable" | |||
|- | |||
|'''For use with''' || Raspberry Pi 5 Model B | |||
|- | |||
| '''UPS Output''' || | |||
* Built for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi systems | |||
* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications | |||
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss | |||
* Power the Pi directly through the 40-pin header, eliminating the need for cables and soldering | |||
|- | |||
| '''Battery Charging''' || | |||
* Supports battery charging with a capacity of 1500mA | |||
* Battery charging control can be managed via GPIO | |||
* Provides protection against battery overcurrent and overvoltage | |||
* Built-in protection against reverse connection of battery cells | |||
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over i2c | |||
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100% | |||
* Features a single 21700 battery holder, supporting battery of up to 5000mAh | |||
|- | |||
|'''Power Input'''|| | |||
* Supports Power over Ethernet (PoE) input capability | |||
* Provides up to 5A output current, enabling 1.5A charging while powering the system | |||
* Standard Compliance: IEEE 802.3af & 802.3at (PoE+) | |||
* Fully isolated switched-mode power supply (SMPS) topology | |||
* Simplified single-cable installation and robust power delivery for Raspberry Pi | |||
* Compatible with Raspberry Pi USB-C Power Supply | |||
|- | |||
|'''Enhanced Power Management'''|| | |||
* Seamless power switching between backup power and power adapter | |||
* On-board push button performs the same actions as the Pi's power button | |||
* Automatically cuts off power when the Pi is shut down | |||
* On-board LED indicates power status and Pi detection | |||
* AC power loss and power adapter failure detection via GPIO | |||
* Auto power-on when power is applied or restored | |||
* Automatic safe shutdown when battery voltage is low (programmable) | |||
* Ultra-low standby power consumption to maximize battery life | |||
* Advanced system power-path management to minimize frequent charging and discharging of batteries | |||
|- | |||
|'''Compatible Accessories'''|| | |||
* [[X1002]] single NVMe shield for Pi5 | |||
* [[X1005]] dual NVMe shield for Pi5 | |||
* [[X1006]] PCIe to SATA 2.5 HDD+M.2 SSD shield for Pi 5 | |||
* [[X1007]] PCIe to dual SATA 2.5 HDD/SSD shield for Pi 5 | |||
* [[X1100]] USB3 to SATA 2.5 HDD/SSD shield for Pi 5 | |||
* Other add-on boards are attached to the bottom of the Raspberry Pi | |||
|- | |||
| '''Notes''' || | |||
* <span style="color:red"> '''DON'T apply''' power to your Raspberry Pi 5 via the Type-C USB socket.</span> | |||
* <span style="color:red">Compatible with unprotected 21700 battery only (Max. length: 70.3 mm). | |||
|} | |||
==Technical specification== | ==Technical specification== | ||