Difference between revisions of "C792"
Jump to navigation
Jump to search
| Line 44: | Line 44: | ||
Here are a few tutorials: | Here are a few tutorials: | ||
* [[X1300 Software]] | * [[X1300 Software]] | ||
| + | * [https://github.com/geekworm-com/RPi5_hdmi_in_card RPi5_hdmi_in_card] | ||
* '''Due to the absence of hardware encoding on the Pi 5B, the software usage instructions for Pi platforms are currently divided into two sections: Pi 5B configuration and configuration for other Pi platforms.''' | * '''Due to the absence of hardware encoding on the Pi 5B, the software usage instructions for Pi platforms are currently divided into two sections: Pi 5B configuration and configuration for other Pi platforms.''' | ||
* <span style="color:red">'''Pi 5B platforms HDMI to CSI module test demo reference： '''</span> [[CSI Manual on Pi 5]] | * <span style="color:red">'''Pi 5B platforms HDMI to CSI module test demo reference： '''</span> [[CSI Manual on Pi 5]] | ||
| − | |||
* [https://github.com/raspberrypi/firmware/issues/1915 ISP freezes with new firmware] | * [https://github.com/raspberrypi/firmware/issues/1915 ISP freezes with new firmware] | ||
* [https://github.com/raspberrypi/firmware/issues/1904 Raspberry Pi 5 firmware ignores and responds with incorrect frame buffer pixel depth information] | * [https://github.com/raspberrypi/firmware/issues/1904 Raspberry Pi 5 firmware ignores and responds with incorrect frame buffer pixel depth information] | ||
Revision as of 19:32, 3 July 2025
Overview
The C792 is a HDMI to CSI-2 converter module with HDMI loop out that supports I2S audio output.
The HDMI input supports up to 4K 60Hz, and the HDMI loop out screen is consistent with the HDMI input screen.
CSI-2 output support up to 1080p 60Hz (4K screen will be automatically scaled to 1080p, the refresh rate remains unchanged).
Hardware Parameters
- Model: C792
- Compatible with Raspberry Pi 5B/4B/3B/Zero/CM5/CM4
- HDMI input: supports up to 1080P60Hz on Raspberry Pi (Only when use with CM4 /CM5/ Pi 5B)
- 2 CSI-2 channels & clock (Pi 4B/3B and Pi Zero only support 2 lan, max 1080P1080p50Hz, and Pi CM4 /CM5/ 5B can support 4 lan, max 1080P1080p60Hz)
- The CSI-2 interface, with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C792 module.
- The CSI-2 interface, with 22 pin FPC seat, spacing 0.5 mm, is located on the back of the C792 module.
- Size: 56 x 56 mm
- Power supply:5V
- Weight: 25g
Important note:
- The hardware programme is GSV2001+TC358743, in which GSV2001 realizes HDMI one-part-two function and TC358743 realizes HDMI to CSI-2 function.
- In order to ensure the stability of the module, it is strongly recommended that the module be powered through the 5V power supply interface.
- When the‘HDMI Loop Out’is connected to the monitor, the HDMI source detects the monitor connected to the‘HDMI Loop Out’; when the‘HDMI Loop Out’is not connected to the monitor, the HDMI source detects the monitor connected to the TC358743. When‘HDMI Loop Out’is not connected to a monitor, the HDMI source detects the monitor emulated by the TC358743.
Packing List
- 1 x C792 HDMI to CSI-2 Module
- 1 x 5V power cable
- 1 x 15cm Length FPC 15pin 1.0mm cable (for Pi 4B / 3B / Pi Zero)
- 1 x 15cm Length FPC 22pin 0.5mm cable (for Pi 5B / CM5 / CM4)
- 1 x I2S cable
User Manual
Here are a few tutorials:
- X1300 Software
- RPi5_hdmi_in_card
- Due to the absence of hardware encoding on the Pi 5B, the software usage instructions for Pi platforms are currently divided into two sections: Pi 5B configuration and configuration for other Pi platforms.
- Pi 5B platforms HDMI to CSI module test demo reference： CSI Manual on Pi 5
- ISP freezes with new firmware
- Raspberry Pi 5 firmware ignores and responds with incorrect frame buffer pixel depth information
- Also refer to: https://wiki.blicube.com/blikvm/en/C792/
FAQ
Expand
Q1: Question 1
Enable comment auto-refresher