C792: Difference between revisions

Line 15:

* Compatible with Raspberry Pi 5B/4B/3B/Zero/CM5/CM4

* HDMI input: supports up to 1080P60Hz on Raspberry Pi (Only when use with CM4 /CM5/ Pi 5B)

* HDMI to CSI-2 bridge chip:Toshiba ~~TC358743XBG~~

* HDMI to CSI-2 bridge chip:Toshiba GSV2001+TC358743

* 2 CSI-2 channels & clock '''(Pi 4B/3B and Pi Zero only support 2 lan, max 1080P1080p50Hz, and Pi CM4 /CM5/ 5B can support 4 lan, max 1080P1080p60Hz)'''

* The CSI-2 interface, with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C792 module.

Line 23:

* Weight: 25g

'''Important note:'''

'''Important note:'''

* The hardware programme is GSV2001+TC358743, in which GSV2001 realizes HDMI one-part-two function and TC358743 realizes HDMI to CSI-2 function.

* The hardware programme is GSV2001+TC358743, in which GSV2001 realizes HDMI one-part-two function and TC358743 realizes HDMI to CSI-2 function.

* In order to ensure the stability of the module, it is strongly recommended that the module be powered through the 5V power supply interface.

* In order to ensure the stability of the module, it is strongly recommended that the module be powered through the 5V power supply interface.

* When the ‘HDMI Loop Out’ is connected to the monitor, the HDMI source detects the monitor connected to the ‘HDMI Loop Out’; when the ‘HDMI Loop Out’ is not connected to the monitor, the HDMI source detects the monitor connected to the TC358743. When ‘HDMI Loop Out’ is not connected to a monitor, the HDMI source detects the monitor emulated by the TC358743.

* When the ‘HDMI Loop Out’ is connected to the monitor, the HDMI source detects the monitor connected to the ‘HDMI Loop Out’; when the ‘HDMI Loop Out’ is not connected to the monitor, the HDMI source detects the monitor connected to the TC358743. When ‘HDMI Loop Out’ is not connected to a monitor, the HDMI source detects the monitor emulated by the TC358743.

==Packing List==

@@ Line 15: / Line 15: @@
 * Compatible with Raspberry Pi 5B/4B/3B/Zero/CM5/CM4
 * HDMI input: supports up to 1080P60Hz on Raspberry Pi (Only when use with CM4 /CM5/ Pi 5B)
-* HDMI to CSI-2 bridge chip:Toshiba TC358743XBG
+* HDMI to CSI-2 bridge chip:Toshiba GSV2001+TC358743
 * 2 CSI-2 channels & clock '''(Pi 4B/3B and Pi Zero only support 2 lan, max 1080P1080p50Hz, and  Pi CM4 /CM5/ 5B can support 4 lan, max 1080P1080p60Hz)'''
 * The CSI-2 interface, with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C792 module.
@@ Line 23: / Line 23: @@
 * Weight: 25g
-'''Important note:'''
+<font color=red>'''Important note:'''</font>
-* The hardware programme is GSV2001+TC358743, in which GSV2001 realizes HDMI one-part-two function and TC358743 realizes HDMI to CSI-2 function.
+* <font color=red>The hardware programme is GSV2001+TC358743, in which GSV2001 realizes HDMI one-part-two function and TC358743 realizes HDMI to CSI-2 function.</font>
-*  In order to ensure the stability of the module, it is strongly recommended that the module be powered through the 5V power supply interface.
+* <font color=red>In order to ensure the stability of the module, it is strongly recommended that the module be powered through the 5V power supply interface.</font>
-*  When the ‘HDMI Loop Out’ is connected to the monitor, the HDMI source detects the monitor connected to the ‘HDMI Loop Out’; when the ‘HDMI Loop Out’ is not connected to the monitor, the HDMI source detects the monitor connected to the TC358743. When ‘HDMI Loop Out’ is not connected to a monitor, the HDMI source detects the monitor emulated by the TC358743.
+* <font color=red> When the ‘HDMI Loop Out’ is connected to the monitor, the HDMI source detects the monitor connected to the ‘HDMI Loop Out’; when the ‘HDMI Loop Out’ is not connected to the monitor, the HDMI source detects the monitor connected to the TC358743. When ‘HDMI Loop Out’ is not connected to a monitor, the HDMI source detects the monitor emulated by the TC358743.</font>
 ==Packing List==