X15-F1: Difference between revisions

Line 4:

[[File:X15-F1-IMG-9589.jpg|thumb|right]]

[[File:X15-F1-IMG-9590.jpg|thumb|right]]

==Overview==

The X15-F1 is an advanced active cooling module specifically designed for X15xx-series CM5 I/O boards while maintaining full compatibility with existing Raspberry Pi cooling solutions. It integrates an 80×80mm PWM-programmable fan delivering adjustable airflow up to 19.68 CFM (0.56 m³/min), ensuring optimal thermal performance for Compute Module 5 systems under sustained high-load conditions.

The X15-F1 is an advanced active cooling module specifically designed for X15xx-series CM5 I/O boards while maintaining full compatibility with existing Raspberry Pi cooling solutions. It integrates an 80×80mm PWM-programmable fan delivering adjustable airflow up to 19.68 CFM (0.56 m³/min), ensuring optimal thermal performance for Compute Module 5 systems under sustained high-load conditions.'''Please Note:''' The 40-pin GPIO header becomes inaccessible after installation.

==Features==

* Excellent cooling performance: 80×80mm PWM-controlled fan with 19.68 CFM max airflow, 8x greater airflow than the Raspberry Pi IO case fan, Real-time speed adjustment for dynamic thermal management.

* Easy installation: Dedicated fan bracket board that enables seamless installation above the I/O boards, Zero-interference design with Raspberry Pi heatsinks/coolers.

* Industrial-Grade Reliability: Stable operation under continuous full load, Vibration-resistant mounting system.

==Specification==

* Operating voltage:5V DC (4.5 – 5.5V) supplied via four-pin fan header on a carrier board

*

* Start voltage:≥ 3.5V

*

* Power consumption:0.8W

*

* Rated current:0.16 ± 0.02A

*

* Fan speed control:Pulse width modulation control with tachometer

*

* Maximum fan speed:2500 RPM ± 10%

*

* Maximum airflow:19.68 CFM

*

* Noise:26.3 dBA

*

* * Dimensions:80×80×10mm (L×W×H)

* Dimensions:80×80×10mm (L×W×H)

*

* Cable length:70 mm

* Pinout:

~~'''Please Note~~:~~'''~~

~~# The 40-pin GPIO header becomes inaccessible after installation.~~

#

~~# Installing an external Wi-Fi antenna on the X15-C1 case becomes challenging once the fan is installed.~~

#

~~# The X15-F1 cannot be installed inside the X15-C2 case.~~

==Packing List==

* 1 x 8010 PWM fan

* 1 x Fan X1500-A1 bracket

* 1 x Fan X1500-A1 V1.0 bracket

* 1 x screw pack

~~==User Manual==~~

* Hardware Installation:

* How to make it work:

==FAQ==

@@ Line 4: / Line 4: @@
 [[File:X15-F1-IMG-9589.jpg|thumb|right]]
 [[File:X15-F1-IMG-9590.jpg|thumb|right]]
-==Overview==
+ ==Overview==
-The X15-F1 is an advanced active cooling module specifically designed for X15xx-series CM5 I/O boards while maintaining full compatibility with existing Raspberry Pi cooling solutions. It integrates an 80×80mm PWM-programmable fan delivering adjustable airflow up to 19.68 CFM (0.56 m³/min), ensuring optimal thermal performance for Compute Module 5 systems under sustained high-load conditions.
+ The X15-F1 is an advanced active cooling module specifically designed for X15xx-series CM5 I/O boards while maintaining full compatibility with existing Raspberry Pi cooling solutions. It integrates an 80×80mm PWM-programmable fan delivering adjustable airflow up to 19.68 CFM (0.56 m³/min), ensuring optimal thermal performance for Compute Module 5 systems under sustained high-load conditions.'''Please Note:''' The 40-pin GPIO header becomes inaccessible after installation.
-==Features==
+ ==Features==
+* Excellent cooling performance: 80×80mm PWM-controlled fan with 19.68 CFM max airflow, 8x greater airflow than the Raspberry Pi IO case fan, Real-time speed adjustment for dynamic thermal management.
+* Easy installation: Dedicated fan bracket board that enables seamless installation above the I/O boards, Zero-interference design with Raspberry Pi heatsinks/coolers.
+* Industrial-Grade Reliability: Stable operation under continuous full load, Vibration-resistant mounting system.
+==Specification==
 * Operating voltage:5V DC (4.5 – 5.5V) supplied via four-pin fan header on a carrier board
-*
 * Start voltage:≥ 3.5V
-*
 * Power consumption:0.8W
-*
 * Rated current:0.16 ± 0.02A
-*
+* Fan speed control:Pulse width modulation control with tachometer
-* Fan speed control:Pulse width modulation control with tachometer
-*
 * Maximum fan speed:2500 RPM ± 10%
-*
 * Maximum airflow:19.68 CFM
-*
 * Noise:26.3 dBA
-*
+* * Dimensions:80×80×10mm (L×W×H)
-* Dimensions:80×80×10mm (L×W×H)
-*
 * Cable length:70 mm
+* Pinout:
-'''Please Note:'''
-# The 40-pin GPIO header becomes inaccessible after installation.
-#
-# Installing an external Wi-Fi antenna on the X15-C1 case becomes challenging once the fan is installed.
-#
-# The X15-F1 cannot be installed inside the X15-C2 case.
 ==Packing List==
 * 1 x 8010 PWM fan
-* 1 x Fan X1500-A1 bracket
+* 1 x Fan X1500-A1 V1.0 bracket
 * 1 x screw pack
-==User Manual==
-* Hardware Installation:
-* How to make it work:
 ==FAQ==