X15-F1: Difference between revisions

← Older edit Newer edit →

VisualWikitext

@@ Line 9: / Line 9: @@
 ==Features==
-* Excellent cooling performance: 80×80mm PWM-controlled fan with 19.68 CFM max airflow, 8x greater airflow than the Raspberry Pi IO case fan, Real-time speed adjustment for dynamic thermal management.
+* Operating voltage:5V DC (4.5 – 5.5V) supplied via four-pin fan header on a carrier board
-* Easy installation: Dedicated fan bracket board that enables seamless installation above the I/O boards, Zero-interference design with Raspberry Pi heatsinks/coolers.
+*
-* Industrial-Grade Reliability: Stable operation under continuous full load, Vibration-resistant mounting system.
+* Start voltage:≥ 3.5V
+*
+* Power consumption:0.8W
+*
+* Rated current:0.16 ± 0.02A
+*
+* Fan speed control:Pulse width modulation control with tachometer
+*
+* Maximum fan speed:2500 RPM ± 10%
+*
+* Maximum airflow:19.68 CFM
+*
+* Noise:26.3 dBA
+*
+* Dimensions:80×80×10mm (L×W×H)
+*
+* Cable length:70 mm
-Operating voltage:5V DC (4.5 – 5.5V) supplied via four-pin fan header on a carrier board
+'''Please Note:'''
-Start voltage:≥ 3.5V
-Power consumption:0.8W
+# The 40-pin GPIO header becomes inaccessible after installation.
-Rated current:0.16 ± 0.02A
+#
-Fan speed control:Pulse width modulation control with tachometer
+# Installing an external Wi-Fi antenna on the X15-C1 case becomes challenging once the fan is installed.
-Maximum fan speed:2500 RPM ± 10%
+#
-Maximum airflow:19.68 CFM
+# The X15-F1 cannot be installed inside the X15-C2 case.
-Noise:26.3 dBA
-Dimensions:80×80×10mm (L×W×H)
-Cable length:70 mm
 ==Packing List==