C792: Difference between revisions
| Line 11: | Line 11: | ||
==Hardware Parameters== | ==Hardware Parameters== | ||
note: | * Model: C792 | ||
* Compatible with Raspberry Pi 5B/4B//3B/Zero/CM5/CM4 | |||
* HDMI input: supports up to 1080P60Hz on Raspberry Pi (Only when use with CM4 /CM5/ Pi 5B) | |||
* HDMI to CSI-2 bridge chip:Toshiba TC358743XBG | |||
* 2 CSI-2 channels & clock (Pi 4B/3B and Pi Zero only support 2 lan, max 1080P1080p50Hz, and Pi CM4 /CM5/ 5B can support 4 lan, max 1080P1080p60Hz) | |||
* The CSI-2 interface, with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C792 module. | |||
* The CSI-2 interface, with 22 pin FPC seat, spacing 0.5 mm, is located on the back of the C792 module. | |||
* Size: 56 x 56 mm | |||
* Power supply:5V | |||
* Weight: 25g | |||
Important note: | |||
The hardware programme is GSV2001+TC358743, in which GSV2001 realizes HDMI one-part-two function and TC358743 realizes HDMI to CSI-2 function. | The hardware programme is GSV2001+TC358743, in which GSV2001 realizes HDMI one-part-two function and TC358743 realizes HDMI to CSI-2 function. | ||
| Line 17: | Line 28: | ||
When the ‘HDMI Loop Out’ is connected to the monitor, the HDMI source detects the monitor connected to the ‘HDMI Loop Out’; when the ‘HDMI Loop Out’ is not connected to the monitor, the HDMI source detects the monitor connected to the TC358743. When ‘HDMI Loop Out’ is not connected to a monitor, the HDMI source detects the monitor emulated by the TC358743. | When the ‘HDMI Loop Out’ is connected to the monitor, the HDMI source detects the monitor connected to the ‘HDMI Loop Out’; when the ‘HDMI Loop Out’ is not connected to the monitor, the HDMI source detects the monitor connected to the TC358743. When ‘HDMI Loop Out’ is not connected to a monitor, the HDMI source detects the monitor emulated by the TC358743. | ||
==Packing List== | ==Packing List== | ||