X850: Difference between revisions

Line 19:

'''Q1.'''What do you need to use Raspberry Pi X850 V3.1 / V3.0 mSATA Storage Board?

Answer:

*A Raspberry Pi board(Pi 3B+, 3B, 2B, B+)

*The Raspberry Pi Power Supply

Line 25:

Line 26:

'''Q2.'''What to do if the X850 device can not be recognized?

Answer:

*Please make sure your all the hardware installation is right, please refer to Installation Guide.

*Try to use the blue usb cable to replace the usb connector to check if it is the usb connector problem.

Line 31:

Line 33:

'''Q3.''' Is it possible to turn off the LED indicator on X850 board?

Answer:

* No, the LED on X850 board is not support to be turned off, and you can use some tape to cover the led if light affected in the dark.

Q4. Why the Raspberry Pi WIFI signal affected when use X850 board?

Answer:

*If you have happened to meet WiFi signal problem, it maybe you use the SAMSUNG SSD Which will have EMC (Electro Magnetic Compatibility) problem. We solved this problem on X850 V3.1 by placing the MSATA under the PCB board.

@@ Line 19: / Line 19: @@
 '''Q1.'''What do you need to use Raspberry Pi X850 V3.1 / V3.0 mSATA Storage Board?
+Answer:
 *A Raspberry Pi board(Pi 3B+, 3B, 2B, B+)
 *The Raspberry Pi Power Supply
@@ Line 25: / Line 26: @@
 '''Q2.'''What to do if the X850 device can not be recognized?
+Answer:
 *Please make sure your all the hardware installation is right, please refer to Installation Guide.
 *Try to use the blue usb cable to replace the usb connector to check if it is the usb connector problem.
@@ Line 31: / Line 33: @@
 '''Q3.''' Is it possible to turn off the LED indicator on X850 board?
+Answer:
 * No, the LED on X850 board is not support to be turned off, and you can use some tape to cover the led if light affected in the dark.
 Q4. Why the Raspberry Pi WIFI signal affected when use X850 board?
+Answer:
 *If you have happened to meet WiFi signal problem, it maybe you use the SAMSUNG SSD Which will have EMC (Electro Magnetic Compatibility) problem. We solved this problem on X850 V3.1 by placing the MSATA under the PCB board.