Difference between revisions of "X1013"
Line 41: | Line 41: | ||
==How to Power== | ==How to Power== | ||
+ | '''X1013 supports two power supply methods:''' | ||
+ | * One is to power through the '''USB-C''' of '''Raspberry Pi 5'''; | ||
+ | * The other is to power through the '''DC5521 Jack''' of '''X1013'''; | ||
+ | |||
+ | '''How to choose the power adapter:''' | ||
+ | * This depends on the number of USB peripherals and the load of X1013. | ||
+ | * If you have a large number of USB peripherals or a '''heavy load''', you need to power it through the '''DC5521 Jack''', otherwise you can use your '''PD27W USB-C power adapter''' to power it. | ||
+ | * No matter which power supply method is used, the '''onboard switch can work normally'''. | ||
+ | * If you need to power through the DC5521 Jack, you can choose a power adapter with a working voltage of 9V-18V. The lower the voltage, the greater the working current required. Please '''DO NOT''' use power adapters suitable for '''LED strips'''. [[PSU60| Geekworm 12V 5V power adapter]] is highly recommended. | ||
+ | |||
+ | <!-- | ||
+ | X1013支持两种供电方式: | ||
+ | 一种是通过树莓派5的USB-C来供电; | ||
+ | 另一种是通过X1013的DC5521 Jack来供电; | ||
+ | |||
+ | 如何选择电源适配器? | ||
+ | 这取决于X1013的USB外设数量及负载情况。 | ||
+ | 如果你的USB外设数量多或者负载大时则需要通过DC5521 Jack来供电,否则您尽可以使用你的PD27W USB-C电源适配器来供电。 | ||
+ | 无论哪种供电方式,板载开关都能正常工作。 | ||
+ | 如果你需要通过DC5521 Jack来供电,可以选择工作电压9V-18V内的电源适配器,选择的电压越小,工作电流要求越大;请不要使用那些适用于LED灯带的电源适配器。推荐Geekworm 12V 5V电源适配器 | ||
+ | |||
+ | |||
Support powering via USB-C on Raspberry Pi 5, however, when there are too many external devices resulting in '''insufficient power supply, it needs to be powered via 9-18Vdc 5521 DC jack of X1013'''. | Support powering via USB-C on Raspberry Pi 5, however, when there are too many external devices resulting in '''insufficient power supply, it needs to be powered via 9-18Vdc 5521 DC jack of X1013'''. | ||
+ | |||
+ | --> | ||
==Packing List== | ==Packing List== |
Revision as of 12:05, 20 August 2024
Overview
This PCIe to 10-port USB 3.0 + USB 2.0 expansion board is specifically designed for the Raspberry Pi 5, offering a convenient plug-and-play solution without the need for additional drivers. It enhances the capabilities of your Pi by adding four USB 3.2 Gen1 ports and six USB 2.0 ports. Equipped with high-performance chips, this board ensures reliable and fast connections, compatible with various operating systems such as Raspberry Pi OS, Ubuntu, and OpenWRT. This expansion board is ideal for enhancing both the connectivity and performance of your Raspberry Pi.
The X1013 connects directly to the underside of the Raspberry Pi 5, eliminating the need for a GPIO passthrough. This allows you to use your favorite HATs while simultaneously utilizing the features of this expansion board. Additionally, with support for 9-18V input via a standard DC jack and high-efficiency DC/DC step-down converters, the X1013 efficiently powers both your Raspberry Pi 5 and USB devices from a single power source, streamlining your setup.
Features
FOR USE WITH |
Raspberry Pi 5 |
Key Features |
|
Technical Specification |
Power supply :
Ports & Connectors:
|
How to Power
X1013 supports two power supply methods:
- One is to power through the USB-C of Raspberry Pi 5;
- The other is to power through the DC5521 Jack of X1013;
How to choose the power adapter:
- This depends on the number of USB peripherals and the load of X1013.
- If you have a large number of USB peripherals or a heavy load, you need to power it through the DC5521 Jack, otherwise you can use your PD27W USB-C power adapter to power it.
- No matter which power supply method is used, the onboard switch can work normally.
- If you need to power through the DC5521 Jack, you can choose a power adapter with a working voltage of 9V-18V. The lower the voltage, the greater the working current required. Please DO NOT use power adapters suitable for LED strips. Geekworm 12V 5V power adapter is highly recommended.
Packing List
- X1013 PCIe to 10-port USB HUB x1
- PCIe cable (37mm) x2 (1 piece is for backup)
- M2.5x5 Screws x4
User Manual
- Hardware Installation: X1013 Hardware
- How to make it work: X1013 Software
FAQ
Q1: Question 1
A: Place the answer here.
Enable comment auto-refresher
Anonymous user #1
Permalink |
Lisa