Difference between revisions of "X880-C1"
(No difference)
|
Latest revision as of 19:03, 28 April 2022
Contents
Overview
This X880-C1 metal case is specially designed for Raspberry Pi 4 Model B with X880 V1.1 12V Dual SATA Gen3 HDD shield & X880-A1-A2 board, it is also support to use with X880 V1.1 board to match with X880-A3 acrylic plates & 2pcs SATA 7+15pin Male to Female cables if you do not have/use X880-A1-A2 board.
For the cooling solution, we use an active cooling solution of 2pin 4010 cooling fan with metal bracket to attach on Raspberry Pi 4 board for heat dissaption. You can also use P165-A or P165-B embedded aluminum alloy heatsink(with/without fan) for passive cooling solution. But please consider the affect of WiFi or Bluetooth.
You can use the X880-C1 to install:
- Raspberry Pi 4 Model B, X880 V1.1 12V Dual SATA Gen3 HDD shield, X880-A1-A2 board(include 2pcs SATA 7+15pin Male to Female cables) & SSD/HDD
- Raspberry Pi 4 Model B, X880 V1.1 12V Dual SATA Gen3 HDD shield, X880-A3 acrylic plates,2pcs SATA 7+15pin Male to Female cables & SSD/HDD
Features
- Round cooling holes on both side of the case, provides good heat dissipation;
- Reserved side slot(interface) for GPIO/FFC Cable
- High quality metal material with surface galvanized process;
- Case Size：185 x 120 x 120mm
- Compatible with P165-A/P165-B heatsink for heat dissipation;
- Compatible with Low-profile CPU Cooler ICE Tower Cooler;
Packing List
X880-C1 Case for X880+X880-A1-A2 (Choose this if you have X880+X880-A1-A2.)
- 1 x X880-C1 Metal Case
- 1 x 2Pin 4010 cooling fan with metal bracket
- 4 x M2.5*6mm Spacers（Fix fan bracket）
- 4 x M2.5*18mm Screw
- 4 x KM3*5mm Screws（Fix the x880 kit to the bottom of the case）
X880-C1 Case for X880+X880-A3 (Choose this if you only have X880 board.)
- 1 x X880-C1 metal case
- 1 x 2Pin 4010 cooling fan with metal bracket
- 2 x X883-A3 acrylic plate
- 2 x SATA 7+15pin male to female cables
- 4 x M2.5*6mm spacers（Fix fan bracket）
- 4 x M2.5*18mm Screw
- 4 x KM3*5mm screws（Fix the x880 kit to the bottom of the case）
User Manual
For Raspberry Pi4+X880+X880-A3+X880-C1:
For Raspberry Pi4+X880+X880-A1-A2+X880-C1:
Enable comment auto-refresher