5,251
edits
Changes
Jump to navigation
Jump to search
no edit summary
<big>X635 Software Guide base on Raspberry Pi OS bullseye</big>
1. To use the HDMI to CSI-2 bridge, you will need to enable '''[[How to enable camera support in Raspberry Pi OS|Enable legacy camera support]]'''.
2. Reboot the device
sudo reboot
3. Again open a terminal window and type the following command:
sudo wget https://datasheets.raspberrypi.org/cmio/dt-blob-cam1.bin -O /boot/dt-blob.bin
#Download the required file /boot/dt-blob.bin
4. Reboot for the dt-blob.bin file to be read
sudo reboot
5. Open the Terminal and run the command to check if the HDMI to CSI-2 bridge is being seen by the operating system.
[[File:X635-software-15.png|700px]]