* Default setting is 'Software reset';
* Please remove the yellow protective film before change dip switch.
<hr/>'''Preparations:'''
1. Once booted, update your Raspberry Pi by running the following commands in a terminal window:
sudo apt-get update
sudo apt-get upgrade
2. Run the following command to go into the Raspberry Pi configuration tool
sudo raspi-config
<hr/>
'''For Software Reset''' - Starting RASPISTILL or RASPIVID multiple times and no need to reboot Raspberry Pi
You can skip to step 12 if you use hardware reset mode;
5. Execute CAM GPIO initialization at startup, need to add scripts in /etc/rc.local file.