-
RPi UPSPack: Difference between revisions
Jump to navigation
Jump to search
Replace <comments/> with <comment-streams /> |
Replace <comments/> with <comment-streams /> |
||
| Line 26: | Line 26: | ||
<comment-streams /> | <comment-streams id="main" /> | ||
[[Category:Product Manual]] | [[Category:Product Manual]] | ||
[[Category:Raspberry pi]] | [[Category:Raspberry pi]] | ||
Latest revision as of 10:13, 27 May 2026
⚠️ Deprecated: This page is outdated and may contain inaccurate information. It is kept for reference only.
Instruction
- Support charge while discharge, it will not affect the output of UPS power supply when external power outage.
- Two power modes: Outdoor portable model and Indoor UPS power supply mode:
- As an outdoor portable power supply, the motherboard is powered by a lithium battery, and the maximum external power supply capacity is 5.1V, 2.5A.
- As an indoor UPS power supply mode: MicroUSB plugs into a normal 5V,2A power adapter, and the external output interface(USB-A interface) can output a maximum of 5.1A, 3A
- 4+2LED to shows charger and discharger, battery power status
- Protect function, The external output port has a self-recovery fuse to prevent the raspberry pi from being burnt due to an external short circuit.
- Two output modes, except for the regular output via USB port. At high currents, such as for high loads above 2.5A, the voltage drop across the USB cable is a problem that cannot be ignored. Therefore, we provide a 2.54mm header, which is welded at the Raspberry Pi GPIO 5V interface for direct power supply, to minimize the cable damaged and pressure drop.
UPS Hat Specification
- Size: 8.5cm x 5.5cm x 0.9cm
- Weight: 35g
