-
GPS Module SKU:384916: Difference between revisions
Jump to navigation
Jump to search
| Line 13: | Line 13: | ||
*With backup rechargeable battery, battery can last about half hour after the power is shut down. you can keep the calendar data. | *With backup rechargeable battery, battery can last about half hour after the power is shut down. you can keep the calendar data. | ||
Note: | '''Note:''' | ||
Because the TXD and RXD pin are be connected a 510ohm resistance to compatible with 3.3V/5V, so you need to use the low resistance cable to connect (example: some USB TTL cables will lead to error). | Because the TXD and RXD pin are be connected a 510ohm resistance to compatible with 3.3V/5V, so you need to use the low resistance cable to connect (example: some USB TTL cables will lead to error). | ||
Revision as of 17:12, 29 April 2026
Instruction
GPS Module w/ Ceramic Passive Antenna for Raspberry Pi / Arduino
Features
- Use U-BLOX NEO-6M modules, high performance;
- With ceramic antennas;
- Set parameters via serial port, and can be saved into the EEPROM;
- Compatible with 3.3V/5V level, easily connect to other single-chip microcomputer system;
- With backup rechargeable battery, battery can last about half hour after the power is shut down. you can keep the calendar data.
Note:
Because the TXD and RXD pin are be connected a 510ohm resistance to compatible with 3.3V/5V, so you need to use the low resistance cable to connect (example: some USB TTL cables will lead to error).
Packing List
- 1 x GPS module
<comments/>