Geekworm Wiki

X306: Difference between revisions

← Older editNewer edit →
VisualWikitext
Ruby (talk | contribs)
commentadmin, Administrators
351 edits
Lisa (talk | contribs)
commentadmin, Administrators
795 edits
Line 37: Line 37:
|-
|-
| <div style="padding: 15px; background-color: #f8f9fa;">
| <div style="padding: 15px; background-color: #f8f9fa;">
The V1.3 & V1.5 version has a 4-pin reserved interface (AL, ON, GND, PSW) that can be used for the following functions:
The V1.3 & V1.5 version has a 4-pin reserved interface (AL ON & GND PSW) that can be used for the following functions:


* <span style="color: #c0392b; font-weight: bold;">⚠️ To use these expansion functions, you will need to prepare your own soldering tools, 4-pin header, jumper cap, and 2-pin momentary switch. These items are not included in the X306 package.</span>
<span style="color: #c0392b; font-weight: bold;">⚠️ To use these expansion functions, you will need to prepare your own soldering tools, 4-pin header, jumper cap, and 2-pin momentary switch. These items are not included in the X306 package.</span>


'''🔧 Preparation'''
'''🔧 Preparation'''
* This interface does '''not''' come with pre-soldered headers. If you need to use the functions below, you will need to solder a 4-pin header yourself.
* Solder a 4-pin header to the reserved interface of X306.
* If you don't need these functions, just use the board as is — no action required.
* If you don't need these functions, just use the board as is — no action required.


'''⚡ Function 1: Power Always On'''
[[File:X306 IMG 6998.JPG|700px|X306]]
* '''How to connect''': Short the AL and ON pins with a jumper cap or solder bridge.
* '''Effect''': When power is connected, the Raspberry Pi will boot up automatically — no need to press any button.


'''🔘 Function 2: External Power Button'''
'''🔘 Function 1: AL & ON - Power Always On'''
* '''How to connect''': Prepare a momentary push button and connect it '''between''' the GND and PSW pins.
* '''Short''': Power always on, power button disabled.
* '''Effect''': You can use this button to power the Raspberry Pi on/off.
* '''Open''': Power button Press to switch on, Hold 3 seconds to switch off.
* '''⚠️ Note''': GND and PSW are the two connection points for the switch. '''Do not short them directly''' — they must be connected through an external switch.
 
[[File:X306 IMG 6998.JPG|700px|X306]]


'''📌 Tips'''
'''🔘 Function 2: PSW & GND - External Power Switch'''
* The two functions are independent — you can use one, both, or neither.
* '''How to connect''': Prepare a momentary push switch and connect it '''between''' the GND and PSW pins.
* If using both: short AL-ON for power always on, and connect a switch between GND-PSW. They do not interfere with each other.
* '''Effect''': Same function as onboard Button.
* '''⚠️ Note''': PSW GND are the two connection points for the switch. '''Do not short them directly.'''
</div>  
</div>  
|}
|}
Retrieved from "https://wiki.geekworm.com/X306"