X450: Difference between revisions

← Older edit Newer edit →

VisualWikitext

@@ Line 7: / Line 7: @@
 ==Overview==
 X450 DAC+AMP Expansion Board
+==Features==
+{| class="wikitable"
+! ITEM !! DESCRIPTION
+|-
+| FOR USE WITH ||
+*Jetson Nano
+|-
+| OPERATING SYSTEM ||
+*All operating systems
+|-
+| KEY FEATURES ||
+*Ideal storage solution for Jetson Nano - 2.5"" SATA HDD/SSD Shield
+*Supports up to 4TB 2.5-inch SATA hard disk drives (HDD) / solid-state drive (SSD)
+*USB 3.1 Gen1 to SATA 6Gb/s bridge controller
+*USB 3.1 Gen1 connectivity offers plug-and-play functionality on your Jetson Nano
+*Quick file transfer with high-speed USB3.1 Gen1 connectivity  from a PC or a Mac
+*Specially-made USB3.1 bridge to connect with Jetson Nano - no additional cables needed
+*On-board DC power jack allows to provide enough power to HDD/SSD
+*Intelligent power management - Automatic powering off when system shutdown
+*With 1 Female to 2 Male DC cable supplied to power both T300 and Jetson Nano
+*USB bus-powered or powered by external power adapter
+*LED blue indicator indicates drive status
+|-
+| POWER SUPPLY ||
+*Power supply via DC jack: 5VDC ±5%.
+*A good quality power supply is required, otherwise the hard disk will not be recognized or the system will automatically shut down.THIS IS VERY IMPORTANT!!
+|-
+| I/O PORTS ||
+*USB Type-A socket x 1
+*DC Jack  5.5x2.1mm x 1
+*22Pin SATA socket x 1
+|-
+| DIMENSION ||
+*PCB Size: 123mm x 79mm
+|-
+|  NOTE ||
+*2.5 inch SATA SSD is not included, Not compatible with M.2 SATA SSDs, M.2 PCIe AHCI SSDs, or other M.2 non-NVMe devices
+*As with all SSDs, new media must be formatted before use
+*Performance depends on host system, workload, and SSD media used
+*SSD will run hot when it is under heavy load
+*Older SSD drives with less efficient flash media may not perform as well as newer drives
+|}
 ==Features==