X1001: Difference between revisions

Line 16:

== Important Notes==

{{NVMe SSD ~~Incompatibility List}}~~

= Important Notice: NVMe SSD Compatibility =

== 1. Core Compatibility ==

This expansion board is '''only compatible with M.2 NVMe SSDs'''.

'''Not compatible:'''

M.2 SATA SSDs, M.2 PCIe AHCI SSDs, and any other M.2 non-NVMe devices.

== 2. SSDs to Avoid (Phison Controller) ==

The following NVMe SSDs equipped with '''Phison controllers''' have been confirmed to have compatibility issues and are '''not recommended''':

* WD Blue SN580 series

* WD Black SN850 series

* WD Black SN770

* WD SN740

* WD SN810

* Inland TN446 NVMe SSD

* Corsair MP600 SSD

* Kingston NV3 NVMe SSD

* Micron 2450 SSD (detectable, but cannot boot from NVMe)

* Other NVMe SSDs using the same Phison controller

== 3. SSDs with Resolved Compatibility Issues ==

The following models originally had compatibility issues but have been resolved with system/firmware updates:

* '''WD Blue SN550 series''' – Resolved after the <code>rpi-eeprom-update</code> released on January 24, 2024

* '''WD Green SN350 series''' – Resolved (refer to community feedback)

:'''Note:''' These SSDs require updating the Raspberry Pi EEPROM and system to the specified version (e.g., after January 24, 2024) to function properly.

== 4. Confirmed Incompatible SSDs (Other Controllers / Models) ==

# '''Micron 2200 256GB M.2 NVMe Gen3 x4''' (Model: MTFDHBA256TCH) Detectable, but cannot boot from NVMe.

# '''SSDs with Polaris Controller''' Compatibility issues have been reported.

# '''SSDs with MAP1202 Controller''' These SSDs do not support PCIe Gen 2 and must be forced to PCIe Gen 3 to be recognized. Due to this incompatibility, they are '''not recommended'''. More details: [https://zhuanlan.zhihu.com/p/644984347 Reference Link]

== 5. Verified Compatible SSDs (Examples) ==

Based on internal testing and community feedback, the following SSDs are known to work:

* Samsung 980 / 990 Pro series

* WD Black SN770 (requires latest EEPROM)

* Kioxia Exceria series

:Compatibility may vary depending on firmware versions. It is recommended to update your Raspberry Pi EEPROM and system to the latest version before use.

For a more comprehensive list, please refer to community-verified compatibility resources: [Link]

== 6. Important Usage Notes ==

# '''Older NVMe SSDs''' may perform slower due to less efficient flash media.

# '''New NVMe SSDs''' come without partitions. They must be partitioned and formatted before they appear in the file manager.

# SSD compatibility with the Raspberry Pi 5 is determined by the Raspberry Pi platform itself, not by the X100X series expansion board.

# '''How to check your SSD controller:''' Run the following command in the terminal:

<pre>

lspci

</pre>

Look for the line labeled '''"Non-Volatile memory controller"''' to identify the controller brand.

== 7. Additional Note ==

Some users have reported that after updating to the latest firmware, certain NVMe SSDs with '''Phison controllers''' work properly.

Reference: [https://wiki.geekworm.com/X1001#comment-4638 X1001 Community Discussion #4638]

==Features==

@@ Line 16: / Line 16: @@
 == Important Notes==
-{{NVMe SSD Incompatibility List}}
+= Important Notice: NVMe SSD Compatibility =
+== 1. Core Compatibility ==
+This expansion board is '''only compatible with M.2 NVMe SSDs'''.
+'''Not compatible:'''<br />
+M.2 SATA SSDs, M.2 PCIe AHCI SSDs, and any other M.2 non-NVMe devices.
+== 2. SSDs to Avoid (Phison Controller) ==
+The following NVMe SSDs equipped with '''Phison controllers''' have been confirmed to have compatibility issues and are '''not recommended''':
+* WD Blue SN580 series
+* WD Black SN850 series
+* WD Black SN770
+* WD SN740
+* WD SN810
+* Inland TN446 NVMe SSD
+* Corsair MP600 SSD
+* Kingston NV3 NVMe SSD
+* Micron 2450 SSD (detectable, but cannot boot from NVMe)
+* Other NVMe SSDs using the same Phison controller
+== 3. SSDs with Resolved Compatibility Issues ==
+The following models originally had compatibility issues but have been resolved with system/firmware updates:
+* '''WD Blue SN550 series''' – Resolved after the <code>rpi-eeprom-update</code> released on January 24, 2024
+* '''WD Green SN350 series''' – Resolved (refer to community feedback)
+:'''Note:''' These SSDs require updating the Raspberry Pi EEPROM and system to the specified version (e.g., after January 24, 2024) to function properly.
+== 4. Confirmed Incompatible SSDs (Other Controllers / Models) ==
+# '''Micron 2200 256GB M.2 NVMe Gen3 x4''' (Model: MTFDHBA256TCH)<br />Detectable, but cannot boot from NVMe.
+# '''SSDs with Polaris Controller'''<br />Compatibility issues have been reported.
+# '''SSDs with MAP1202 Controller'''<br />These SSDs do not support PCIe Gen 2 and must be forced to PCIe Gen 3 to be recognized. Due to this incompatibility, they are '''not recommended'''.<br />More details: [https://zhuanlan.zhihu.com/p/644984347 Reference Link]
+== 5. Verified Compatible SSDs (Examples) ==
+Based on internal testing and community feedback, the following SSDs are known to work:
+* Samsung 980 / 990 Pro series
+* WD Black SN770 (requires latest EEPROM)
+* Kioxia Exceria series
+:Compatibility may vary depending on firmware versions. It is recommended to update your Raspberry Pi EEPROM and system to the latest version before use.
+For a more comprehensive list, please refer to community-verified compatibility resources: [Link]
+== 6. Important Usage Notes ==
+# '''Older NVMe SSDs''' may perform slower due to less efficient flash media.
+# '''New NVMe SSDs''' come without partitions. They must be partitioned and formatted before they appear in the file manager.
+# SSD compatibility with the Raspberry Pi 5 is determined by the Raspberry Pi platform itself, not by the X100X series expansion board.
+# '''How to check your SSD controller:'''<br />Run the following command in the terminal:
+ <pre>
+ lspci
+ </pre>
+ Look for the line labeled '''"Non-Volatile memory controller"''' to identify the controller brand.
+== 7. Additional Note ==
+Some users have reported that after updating to the latest firmware, certain NVMe SSDs with '''Phison controllers''' work properly.<br />
+Reference: [https://wiki.geekworm.com/X1001#comment-4638 X1001 Community Discussion #4638]
 ==Features==