X15-F1

File:X15-F1-IMG-9589.jpg

File:X15-F1-IMG-9590.jpg

Overview

The X15-F1 is an advanced active cooling module specifically designed for X15xx-series CM5 I/O boards while maintaining full compatibility with existing Raspberry Pi cooling solutions. It integrates an 80×80mm PWM-programmable fan delivering adjustable airflow up to 19.68 CFM (0.56 m³/min), ensuring optimal thermal performance for Compute Module 5 systems under sustained high-load conditions.

Features

• Excellent cooling performance: 80×80mm PWM-controlled fan with 19.68 CFM max airflow, 8x greater airflow than the Raspberry Pi IO case fan, Real-time speed adjustment for dynamic thermal management.
• Easy installation: Dedicated fan bracket board that enables seamless installation above the I/O boards, Zero-interference design with Raspberry Pi heatsinks/coolers.
• Industrial-Grade Reliability: Stable operation under continuous full load, Vibration-resistant mounting system.

Operating voltage:5V DC (4.5 – 5.5V) supplied via four-pin fan header on a carrier board Start voltage:≥ 3.5V Power consumption:0.8W Rated current:0.16 ± 0.02A Fan speed control:Pulse width modulation control with tachometer Maximum fan speed:2500 RPM ± 10% Maximum airflow:19.68 CFM Noise:26.3 dBA Dimensions:80×80×10mm (L×W×H) Cable length:70 mm

Packing List

1 x 8010 PWM fan

1 x Fan X1500-A1 bracket

1 x screw pack

User Manual

• Hardware Installation:
• How to make it work:

FAQ

Q1: Question 1

A: Place the answer here.

<comments />