|
|
| Line 106: |
Line 106: |
| </div> | | </div> |
| </div> | | </div> |
| | | <div class="toccolours mw-collapsible mw-collapsed"> |
| Q1. The adapter board is connected to the EDP signal, but there is no HDMI output?
| | <div style="font-weight:bold;line-height:1.0;"> |
| | | Q: Does this adapter support 1080p up to 240hz? |
| Answer:
| | </div> |
| #Please check whether the EDP cable is connected correctly, differential signal and power supply.
| | <div class="mw-collapsible-content"> |
| #The power supply voltage should be above 4.5V.
| | No, the adapter can only support 1080p up to 60hz. |
| #EDP output to distinguish VESA compliance, refer to point 6 of user manual.
| | </div> |
|
| | </div> |
| Q2.The HDMI output picture is normal, but the color of the picture is abnormal?
| |
| | |
| Answer:
| |
| #The data format of the EDP signal does not match the configuration of the adapter board, single 8 or double 8.
| |
| #EDP signal board need to adjust program or enter the factory menu to set EDP MAP (VESA or JEIDA).
| |
| #The adapter board upgrades the program and reconfigures the parameters.
| |
| | |
| Q3. The size of the HDMI output picture abnormal or the position shifted?
| |
| | |
| Answer: The EDP signal board should adjust the EDP parameters strictly according to the VESA standard configuration, refer to point 6 of user manual for common resolutions.
| |
| | |
| | |
| Q4. The HDMI output screen jittery, flickering and other unstable phenomena?
| |
| | |
| Answer: Focus on checking the EDP signal parameter configuration, turn off the spread spectrum (NOSSC) of EDP output, and turn on the FREERUN function.
| |
|
| |
|
| <!--Add review function! --> | | <!--Add review function! --> |