2,878
edits
Changes
X880
,==Features==
* Ideal storage solution for Raspberry Pi 4 - Dual SATA Gen3 ports Shield * Create high performance storage with a dual SATA HDD RAID array through USB 3.1 (5Gbps)* Supports Standard Desktop 2.5"/3.5" SATA Hard Drives or SSD* Supports hard drives up to 10TB* Supports SATA I, II and III and is enhanced with UASP to maximize the performance and speed of your SATA III drives* Supports Transfer Speeds up to 5Gbps (USB 3.0),480Mbps (USB 2.0), 12Mbps (USB 1.1)* Supports hardware JBOD, RAID0(striping), RAID1(mirror), Normal mode* Supports mode select via jumper setting* Plug-and-play, no drivers needed* Powers the Raspbeerry Pi via test pins - Only one PSU required* Specially-made USB3.1 jumper to connect with RaspberryPi - no additional cables needed * LED blue indicator indicates each drive status * Mounting holes and standoffs provide mechanicalstability of the RaspberryPi and X880 assembly* Heat dissipation solution:We recommend use embedded radiator P165-A or P165-B* Supports installation of X880-A1 A2 2.5 "/ 3.5" SATA SSD/HDD Shield
==Packing List==