Enable pikvm hdmi audio: Difference between revisions

(3 intermediate revisions by 3 users not shown)

Line 1:

This article describes how to enable hdmi audio on the Geekworm PiKVM hardware such as [[X650]] / [[X680]] / [[KVM-A3]] etc , you can refer to [https://docs.pikvm.org/audio/ pikvm official audio tutorial] also.

This article describes how to enable hdmi audio on the Geekworm PiKVM hardware such as [[X651]] / [[X650]] / [[X680]] / [[KVM-A3]] etc , you can refer to [https://docs.pikvm.org/audio/ pikvm official audio tutorial] also.

Line 23:

5. Update the OS:

rw

~~pacman -Syu~~

~~6. Edit /etc/kvmd/janus/janus.plugin.ustreamer.jcfg and add the following lines at the end:~~

pikvm-update

~~<pre>~~

~~audio: {~~

~~device = "hw:0,0"~~

~~tc358743 = "/dev/kvmd~~-~~video"~~

}

~~</pre>~~

7. Enable the basic audio in the EDID:

6. Enable the basic audio in the EDID:

rw

kvmd-edidconf --set-audio=yes

8. Reboot the device:

7. Reboot the device:

reboot

9. Your host will detect the possibility of audio output via HDMI. Mac OS usually connects automatically, Windows requires manual indication, Linux will require a ritual shamanic dance. In any case, make sure that the audio is output via HDMI on your host. PiKVM supports stereo mode with any standard bits and frequencies like 32/44.1/48 kHz with 16/24 bit.

8. Your host will detect the possibility of audio output via HDMI. Mac OS usually connects automatically, Windows requires manual indication, Linux will require a ritual shamanic dance. In any case, make sure that the audio is output via HDMI on your host. PiKVM supports stereo mode with any standard bits and frequencies like 32/44.1/48 kHz with 16/24 bit.

10. Open the PiKVM Web UI. Click the System menu and switch the video mode to H.264 / WebRTC. After that, the volume slider will appear under the switch. Increase it to the maximum and have fun.

9. Open the PiKVM Web UI. Click the System menu and switch the video mode to H.264 / WebRTC. After that, the volume slider will appear under the switch. Increase it to the maximum and have fun.

<~~comments~~ />

<comment-streams id="main" />

@@ Line 1: / Line 1: @@
 {{GD Template Impl}}
-This article describes how to enable hdmi audio on the Geekworm PiKVM hardware such as [[X650]] / [[X680]] / [[KVM-A3]] etc , you can refer to [https://docs.pikvm.org/audio/ pikvm official audio tutorial] also.
+This article describes how to enable hdmi audio on the Geekworm PiKVM hardware such as [[X651]] / [[X650]] / [[X680]] / [[KVM-A3]] etc , you can refer to [https://docs.pikvm.org/audio/ pikvm official audio tutorial] also.
@@ Line 23: / Line 23: @@
 . Update the OS:
- rw
- pacman -Syu
-. Edit /etc/kvmd/janus/janus.plugin.ustreamer.jcfg and add the following lines at the end:
+ pikvm-update
-<pre>
-audio: {
-    device = "hw:0,0"
-    tc358743 = "/dev/kvmd-video"
-}
-</pre>
 . Enable the basic audio in the EDID:
+ rw
   kvmd-edidconf --set-audio=yes
 . Reboot the device:
   reboot
 . Your host will detect the possibility of audio output via HDMI. Mac OS usually connects automatically, Windows requires manual indication, Linux will require a ritual shamanic dance. In any case, make sure that the audio is output via HDMI on your host. PiKVM supports stereo mode with any standard bits and frequencies like 32/44.1/48 kHz with 16/24 bit.
 . Open the PiKVM Web UI. Click the System menu and switch the video mode to H.264 / WebRTC. After that, the volume slider will appear under the switch. Increase it to the maximum and have fun.
 <!--Add review function! -->
-<comments />
+<comment-streams id="main" />
 <!--Please choose the  -->