Difference between revisions of "X1013"
(7 intermediate revisions by 2 users not shown) | |||
Line 41: | Line 41: | ||
==How to Power== | ==How to Power== | ||
+ | '''X1013 supports two power supply methods:''' | ||
+ | * One is to power through the '''USB-C''' of '''Raspberry Pi 5''', a '''PD27W USB-C power adapter''' is required | ||
+ | * The other is to power through the '''DC5521 Jack''' of '''X1013''', a '''9V-18V DC 5521 Jack power adapter''' is required. | ||
+ | |||
+ | '''How to choose the power adapter:''' | ||
+ | * This depends on the number of USB peripherals and the load of X1013. | ||
+ | * If you have a large number of USB peripherals or a '''heavy load''', you need to power it through the '''DC5521 Jack''', otherwise you can use your '''PD27W USB-C power adapter''' to power it. | ||
+ | * No matter which power supply method is used, the '''onboard switch can work normally'''. | ||
+ | * If you need to power through the DC5521 Jack, you can choose a power adapter with a working voltage of 9V-18V. The lower the voltage, the greater the working current required. Please '''DO NOT''' use power adapters suitable for '''LED strips'''. [[PSU60| Geekworm DC5521 12V 5A power adapter]] is highly recommended. | ||
+ | |||
+ | [[File: X1013-IMG-8838-How-to-Power.jpg|600px]] | ||
+ | <!-- | ||
+ | X1013支持两种供电方式: | ||
+ | 一种是通过树莓派5的USB-C来供电; | ||
+ | 另一种是通过X1013的DC5521 Jack来供电; | ||
+ | |||
+ | 如何选择电源适配器? | ||
+ | 这取决于X1013的USB外设数量及负载情况。 | ||
+ | 如果你的USB外设数量多或者负载大时则需要通过DC5521 Jack来供电,否则您尽可以使用你的PD27W USB-C电源适配器来供电。 | ||
+ | 无论哪种供电方式,板载开关都能正常工作。 | ||
+ | 如果你需要通过DC5521 Jack来供电,可以选择工作电压9V-18V内的电源适配器,选择的电压越小,工作电流要求越大;请不要使用那些适用于LED灯带的电源适配器。推荐Geekworm 12V 5V电源适配器 | ||
+ | |||
+ | |||
Support powering via USB-C on Raspberry Pi 5, however, when there are too many external devices resulting in '''insufficient power supply, it needs to be powered via 9-18Vdc 5521 DC jack of X1013'''. | Support powering via USB-C on Raspberry Pi 5, however, when there are too many external devices resulting in '''insufficient power supply, it needs to be powered via 9-18Vdc 5521 DC jack of X1013'''. | ||
+ | |||
+ | --> | ||
+ | |||
+ | ==Matching Case== | ||
+ | No matching case now, if you really need it, please email us at support@geekworm.com | ||
==Packing List== | ==Packing List== | ||
Line 54: | Line 82: | ||
==FAQ== | ==FAQ== | ||
+ | |||
<!-- 这里提供了一个Q&A的模板,增加Q&A时按照下面的格式写就可以了 --> | <!-- 这里提供了一个Q&A的模板,增加Q&A时按照下面的格式写就可以了 --> | ||
<div class="toccolours mw-collapsible mw-collapsed"> | <div class="toccolours mw-collapsible mw-collapsed"> | ||
<div style="font-weight:bold;line-height:1.0;"> | <div style="font-weight:bold;line-height:1.0;"> | ||
− | Q1: | + | Q1: Do I need to power the Pi 5 and X1003 separately? |
</div> | </div> | ||
<div class="mw-collapsible-content"> | <div class="mw-collapsible-content"> | ||
− | A: | + | A: '''No''', a single power adapter is sufficient, and whether you use the USB-C or DC5521 power adapter, the Pi 5 and X1013 power each other via '''pogo pins'''. |
</div> | </div> | ||
</div> | </div> |
Latest revision as of 18:17, 20 August 2024
Overview
This PCIe to 10-port USB 3.0 + USB 2.0 expansion board is specifically designed for the Raspberry Pi 5, offering a convenient plug-and-play solution without the need for additional drivers. It enhances the capabilities of your Pi by adding four USB 3.2 Gen1 ports and six USB 2.0 ports. Equipped with high-performance chips, this board ensures reliable and fast connections, compatible with various operating systems such as Raspberry Pi OS, Ubuntu, and OpenWRT. This expansion board is ideal for enhancing both the connectivity and performance of your Raspberry Pi.
The X1013 connects directly to the underside of the Raspberry Pi 5, eliminating the need for a GPIO passthrough. This allows you to use your favorite HATs while simultaneously utilizing the features of this expansion board. Additionally, with support for 9-18V input via a standard DC jack and high-efficiency DC/DC step-down converters, the X1013 efficiently powers both your Raspberry Pi 5 and USB devices from a single power source, streamlining your setup.
Features
FOR USE WITH |
Raspberry Pi 5 |
Key Features |
|
Technical Specification |
Power supply :
Ports & Connectors:
|
How to Power
X1013 supports two power supply methods:
- One is to power through the USB-C of Raspberry Pi 5, a PD27W USB-C power adapter is required
- The other is to power through the DC5521 Jack of X1013, a 9V-18V DC 5521 Jack power adapter is required.
How to choose the power adapter:
- This depends on the number of USB peripherals and the load of X1013.
- If you have a large number of USB peripherals or a heavy load, you need to power it through the DC5521 Jack, otherwise you can use your PD27W USB-C power adapter to power it.
- No matter which power supply method is used, the onboard switch can work normally.
- If you need to power through the DC5521 Jack, you can choose a power adapter with a working voltage of 9V-18V. The lower the voltage, the greater the working current required. Please DO NOT use power adapters suitable for LED strips. Geekworm DC5521 12V 5A power adapter is highly recommended.
Matching Case
No matching case now, if you really need it, please email us at support@geekworm.com
Packing List
- X1013 PCIe to 10-port USB HUB x1
- PCIe cable (37mm) x2 (1 piece is for backup)
- M2.5x5 Screws x4
User Manual
- Hardware Installation: X1013 Hardware
- How to make it work: X1013 Software
FAQ
Q1: Do I need to power the Pi 5 and X1003 separately?
A: No, a single power adapter is sufficient, and whether you use the USB-C or DC5521 power adapter, the Pi 5 and X1013 power each other via pogo pins.
Enable comment auto-refresher
Anonymous user #1
Permalink |
Lisa