3,316 bytes added,
17:13, 1 September 2018 [[File:IMG_1149.jpg|thumb|right|Raspberry Pi USB 16x2 RGB LCD sku:443780]]
{{GD Template Impl}}
[[File:IMG_1152.jpg|thumb|right|Raspberry Pi USB 16x2 RGB LCD sku:443780]]
[[File:IMG_1154.jpg|thumb|right|Raspberry Pi USB 16x2 RGB LCD sku:443780]]
[[File:IMG_1178.jpg|thumb|right|Raspberry Pi USB 16x2 RGB LCD sku:443780]]
== Introduction ==
SKU: 443780
USBLCD is suitable for Raspberry Pi Model B and B Plus and PC as well, support win/ linux and multi-system with processor.
And support various of LCD. It can program control without occupying GPIO interface.
[NEW]: [[How to display the Volumio of DAC+]]
[Releated]: [RPI HIFI DAC+ Digital Audio Card SKU:363003]
== Features ==
* The right size of 1602 LCD screen, can stand on the table and DIY to any cases.
* The USB interface can help you avoid various wiring.
* No drive and no program on Raspberry Pi, great function supports XBMC system.
* Support various size of LCD, SO far we’ ve tested it on LCD1602, CD1604, D44780, CD2004 etc.
* Compatible with PC, It can display operational information via software configuration.
* Support switching details and programming other function with two button.
* Support Program Controlling under the condition of Python.
* Provide deploy course about CN and EN instructions.
== Python Course ==
* Install course and the needed software and file
* Install python file of LCD, then operate
''$ sudo pip install lcd2usb''
[[File:USBLCD.jpg]]
* Download python example course we provided,unzip and copy into Raspberry.
* Program the example course,it defaults time and IP address. It' ll display CPU occupancy rate, temperature
and RAM occupancy rate etc
''$ sudo python usblcd.py''
[[File:USBLCD2.jpg|300px]]
[[File:USBLCD3.jpg|300px]]
[[File:USBLCD4.jpg|300px]]
Besides, you can also use the lcd test program to test whether connect in normal.
== Volumio course ==
[[File:Mpdlcd4.jpg|300px]]
* Install the software of lcdproc screen display
''sudo apt-get install lcdproc''
[[File:Mpdlcd1.jpg|300px]]
* Edit deploying file
''sudo nano /etc/LCDd.conf''
[[File:Mpdlcd2.jpg|300px]]
* Find out and Revise the following contect:
Revise 'Driver=curses ' for 'Driver=hd44780'
Revise '#ServerScreen=no' for 'ServerScreen=off'
Find out [hd44780] and revise the information:
[hd44780]
ConnectionType=lcd2usb
Contrast=850
Brightness=800
OffBrightness=0
Keypad=yes
Backlight=yes
Size=16×2
KeyDirect_1=Up
KeyDirect_2=Down
* Install software of MPDlcd
''sudo apt-get install python-mpd''
''sudo apt-get install python-pip''
''sudo pip install mpdlcd''
''wget -O /etc/mpdlcd.conf''
* Operate related software when startup deploy system
''sudo update-rc.d LCDd defaults''
Edit /etc/rc.local, add the following order before exit0
''su pi -c mpdlcd –no-syslog &''
[[File:Mpdlcd3.jpg|300px]]
== Download ==
Python annex: [[File:USBLCD1.zip|thumbnail]]
[http://ukonline2000.com/?p=43| software and file for python course]
[https://github.com/xyb/lcd2usb| Referance software for python course]
[https://raw.github.com/rbarrois/mpdlcd/master/mpdlcd.conf| MPDlcd]
[https://pypi.python.org/pypi/mpdlcd/0.4.0| MPDlcd/0.4.0]
[https://github.com/rbarrois/mpdlcd| MPDlcd software]
== Packing List ==
* 1 x LCD Screen
[[Category:Product Manual]]
[[Category:Raspberry pi]]
<comments/>