Difference between revisions of "Temperature and Humidity Wifi Switch"
(No difference)
|
Latest revision as of 15:58, 20 May 2017
Contents
Overview
This WIFI switch have 2 wide voltage input voltage, AC/DC 85V-220V and 7V~32V; output the switch signal to control your device , it can control the range of temperature and humidity, to achieve the automatic control of your home appliance,and monitoring the temperature and humidity.
Features
- Input: AC/DC 85V-220V or 7V~32V;
- Constant temperature and humidity control
- Jog, self-locking dual mode
- Share function
- Timing function
- Time delay function
- Phone APP automatic or manual mode control
- Phone APP automatic mode: controll by setting the maximum temperature and minimum temperature
PS: what's Jog mode?
what's self0locking mode?
APP Downlaod
Or please scan the QRCode with your mobile phone
Application scene
- Electric Fireplace
- electric heater
- carbon crystal heating
- electric warming fan
- electrical oil heater
- greenhouse etc.
This is APP control interface for you to set Auto mode or Manual mode.
Enter this interface you can set the temperature and humidity.
Lower than 22℃ Button grey means when temperature is lower than 22℃, the switch controller will stop working.
Higher than 26℃ Button blue means when temperature is higher than 26℃, the switch controller will start working.
The humidity control is the same principle as above.
You can comtrol the temperature and humidity as you wish, very convenient.
[Device Setting]
Enter this interface you can control the Power on Switch State, usually we keep it "OFF".
Temperature and Humidity Sensor Specifications
- Measurement range:
- Temperature: -40 - +80℃
- Humidity: 0 - 99.9%RH
- Accuracy(in 25℃):
- Temperature: ±0.5℃
- Humidity: ±3%RH (10...90%RH)
Sensor Specification
- Temperature: resistive transducer
- Humidity: capacitive transducer
- Working temperature range: -40 - +80℃
- Plower supply: DC 3.1V-5.5V
- Output: digital (1 wire)
- Case material: ABS
- Weight: 14g