Difference between revisions of "X15-F1"
Jump to navigation
Jump to search
| Line 38: | Line 38: | ||
==Packing List== | ==Packing List== | ||
| − | 1 x 8010 PWM fan | + | * 1 x 8010 PWM fan |
| − | + | * 1 x Fan X1500-A1 bracket | |
| − | 1 x Fan X1500-A1 bracket | + | * 1 x screw pack |
| − | |||
| − | 1 x screw pack | ||
==User Manual== | ==User Manual== | ||
Revision as of 15:39, 2 July 2025
Contents
Overview
The X15-F1 is an advanced active cooling module specifically designed for X15xx-series CM5 I/O boards while maintaining full compatibility with existing Raspberry Pi cooling solutions. It integrates an 80×80mm PWM-programmable fan delivering adjustable airflow up to 19.68 CFM (0.56 m³/min), ensuring optimal thermal performance for Compute Module 5 systems under sustained high-load conditions.
Features
- Operating voltage:5V DC (4.5 – 5.5V) supplied via four-pin fan header on a carrier board
- Start voltage:≥ 3.5V
- Power consumption:0.8W
- Rated current:0.16 ± 0.02A
- Fan speed control:Pulse width modulation control with tachometer
- Maximum fan speed:2500 RPM ± 10%
- Maximum airflow:19.68 CFM
- Noise:26.3 dBA
- Dimensions:80×80×10mm (L×W×H)
- Cable length:70 mm
Please Note:
- The 40-pin GPIO header becomes inaccessible after installation.
- Installing an external Wi-Fi antenna on the X15-C1 case becomes challenging once the fan is installed.
- The X15-F1 cannot be installed inside the X15-C2 case.
Packing List
- 1 x 8010 PWM fan
- 1 x Fan X1500-A1 bracket
- 1 x screw pack
User Manual
- Hardware Installation:
- How to make it work:
FAQ
Q1: Question 1
A: Place the answer here.
Enable comment auto-refresher