C792

Overview

The C792 is an HDMI to CSI-2 converter module with HDMI loop out that supports I2S audio output.

The HDMI input supports up to 4K 60Hz, and the HDMI loop out screen is consistent with the HDMI input screen.

CSI-2 output support up to 1080p 60Hz (4K screen will be automatically scaled to 1080p, the refresh rate remains unchanged).

Hardware Parameters

Model: C792

Compatible with Raspberry Pi 5B/4B//3B/Zero/CM5/CM4

HDMI input: supports up to 1080P60Hz on Raspberry Pi (Only when use with CM4 /CM5/ Pi 5B)

HDMI to CSI-2 bridge chip:Toshiba TC358743XBG

2 CSI-2 channels & clock (Pi 4B/3B and Pi Zero only support 2 lan, max 1080P1080p50Hz, and Pi CM4 /CM5/ 5B can support 4 lan, max 1080P1080p60Hz)

The CSI-2 interface, with 15 pin FPC seat, spacing 1.0 mm, is located on the front of the C792 module.

The CSI-2 interface, with 22 pin FPC seat, spacing 0.5 mm, is located on the back of the C792 module.

Size: 56 x 56 mm

Power supply:5V

Weight: 25g

Packing List

• 1 x C790 HDMI to CSI-2 Module
• 1 x 5V power cable
• 1 x 15cm Length FPC 15pin 1.0mm cable (for Pi 4B / 3B / Pi Zero)
• 1 x 15cm Length FPC 22pin 0.5mm cable (for Pi 5B / CM5 / CM4)
• 1 x I2S cable

500px

User Manual

• Hardware Installation:
• How to make it work:

FAQ

Q1: Question 1

A: Place the answer here.

Add your comment

Geekworm Wiki welcomes all comments. If you do not want to be anonymous, register or log in. It is free.

Sort by date Sort by score

Enable comment auto-refresher

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

4 days ago

Score 0

is there a way to configure the GSV2001 to provide 720p to the CSI interface for capturing on older pi's regardless of the input resolution, or is it only able to scale 4k down to 1080p60 as noted above?

Permalink | Reply

You are ignoring the author of this comment

Show comment | Manage ignore list

Anonymous user #1

3 days ago

Score 0

Looks like this is a limitation of the GSV2001 and not configurable. > 1.2.3 Internal Downscaler

> Scaler is only used to downscale 4k UHD timings to 2k FHD timings. The horizontal resolution and vertical resolution are both cut in half while frame rate remains the same.

Permalink