Open main menu
Geekworm Wiki

Changes

X650

351 bytes removed, 12 May
[[File:X650-IMG-5483.jpg|thumb|right|X650 kvm shield]]
[[File:X650-IMG-5611-Interface-Schematic.jpg|thumb|right|X650 kvm hardware diagram]]
[[File:IMG-7148-Dimension.jpg|thumb|right|X650 Dimension]]
[[File:X650-IMG-5476.jpg|thumb|right|10-Pin Header function]]
[[File:X650-IMG-5474.jpg|thumb|right|10-Pin Header function]]
Want to know more information for pikvm, please refer to https://pikvm.org/
 
 
<span style="color:red;">X650 V1.5 and X650 V1.3 has been discontinued, you can refer to [[X651]] or [[X652]]. </span>
 
Key differences between X650 V1.5 & X650 V1.3 include:
 
'''Input Resolution'''
 
* X650 V1.3: Supports up to 1920×1080@<span style="color:red;">'''50Hz'''</span>
* X650 V1.5: Supported up to 1920×1080@<span style="color:red;">'''60Hz'''</span>
 
'''RTC Function'''
* X650 V1.3: Requires manual [[X650#Enable_RTC|RTC configuration]]
* X650 V1.5: No RTC configuration needed
:We recommend that you use the ''''V3 Pre-Assembled'''' version, and this image includes OLED display configuration.
:<span style="color:red;">Only compatible with '''PiKVM V3 ''' platform OS, NOT support PiKVM V4 Plus & V4 Mini platform!!!</span>
:[[File:Pi4-V3-HAT.png|800px|PiKVM V3 platform]]
:'''3. Power the Device'''
:*Power on your device, then open a browser and log in to the PiKVM web UI.
 
'''Option 2: CM4 with eMMC (requires additional steps)'''
:'''1. Prepare for flashing'''
:*Short the nBOOT Pin as shown in the image below.
::[[File:X650-IMG-5474-1.jpg|500px]]
: '''2. Connect X680 to Your ComputerUse the ''':*Use a TypeUSB-A C to TypeTYPC-B USB A OTG cable ''' included in the X650 box to connect the CM4 USB port to your computer.::[[File:X680-IMG-5546-3.jpg|500px]]
: '''3. Power the Device'''
:*Use a 5V power adapter to power the device via the PWR DC JackType-C port.
: '''4. Flash the OS Image'''
:*You need: i) install rpiboot utility, ii) install RaspberryPI imager iii) format the eMMC once connected to the host, iv) select OS, eMMC appearing on the host and flash it via imager
:*Remove the nBOOT jumper after the flashing is complete, then restart your device.
'''Note''': For CM4 with eMMC, the SD card cannot be used.
 
#CM4 without eMMC (simpler, but you need a 32GB or 64GB micro sd)
:''' 1) How to installing the Operating System''' (CM4 without eMMC)
 
:Refer to [https://www.raspberrypi.com/documentation/computers/getting-started.html#installing-the-operating-system Official installation tutorial]
 
:'''2) How to flash OS onto the eMMC of CM4? (CM4 with eMMC)'''
 
::a. Short nBOOT&GND, refer to the picture below.
 
::[[File:X650-IMG-5474-1.jpg|500px]]
 
::b. Connect Type-C OTG to your computer
 
::c. Power the X650 via PWR Type-C with your 5V Power adaper
 
::d. Then rerfer to [https://www.jeffgeerling.com/blog/2020/how-flash-raspberry-pi-os-compute-module-4-emmc-usbboot this tutorial] to flash pikvm OS
 
::e. Remove the jumper of nBOOT&GND after flashing is complete, then restart your device;
 
4. Power the device, then open explore to login the pikvm web ui.
===Enable RTC ===
==Packing List==
* 1 x X650 V1.3 Expansion Board
* 1 x X680-A1 V1.0 cooling fan Adapter board
* 1 x Colorful ATX Control Cable (Cable Length: 47cm / 18.50 inch)
Retrieved from "https://wiki.geekworm.com/Special:MobileDiff/21944...22871"