Changes

Jump to navigation Jump to search

GEEKWORM NAS Family

5,513 bytes added, 18 June
{{GD Template Impl}}
==Raspberry pi 5 NAS Storage==
===Raspberry pi 5 NVMe===
{{PCIe to NVME Sets}}
===Raspberry pi 4 NAS Storage Family5 SATA==={{Template:Raspberry pi 5 SATA}} ==='''for 2.5" sata'''=NASPi Storage series=={| class="wikitable collapsible"! Product Name !! NASPi !! NASPi Lite !! '''Please enter the following correspond user manual and installation video page according to the NASPi Gemini !! X825 V2product you purchased.0 '''|-!Model ! X825 V1.5 !Compatible with ! X825v !Supported HDD ! X880 !! X883 !! X828(Stackable) !! X829(Dual SATA)Installation Video
|-
! Compatible with| raspberry pi 4 [[NASPi]] || raspberry pi 4 Raspberry Pi 4B || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 |2.5 inch HDD/SSD (1pcs) | raspberry pi 4 || raspberry pi 4Please refer to [https:/ 3B+/ 3Bwiki.geekworm.com/ 2B/ B+ || raspberry pi 4NASPi#Installation_Video NASPi Installation Video]
|-
! Socket| 2.5" sata HDD/SSD || 2.5" sata HDD/SSD || 2.5" sata HDD/SSD || 2.5" sata HDD/SSD [[NASPi Lite]] || 2.5" sata HDD/SSD Raspberry Pi 4B || 2.5" sata inch HDD/SSD (1pcs) || 2.5" /3.5" sata HDDPlease refer to [https:/SSD || 2.5" sata HDD/SSD || one or multiple 2wiki.5" sata HDD/SSD by stack the X828 || Dual 2geekworm.5" sata HDDcom/SSDNASPi_Lite#Installation_Video NASPi Lite Installation Video]
|-
! Number of SSD/HDD Supported| 1 pcs || 1 pcs || [[NASPi Gemini 2 pcs || 1 pcs || 1 pcs .5]] || 1 pcs Raspberry Pi 4B || 2 pcs || 2 pcs || 1+ pcs .5 inch HDD/SSD (2pcs) || Please refer to [https://wiki.geekworm.com/NASPi_Gemini_2.5#Installation_Video NASPi Gemini 2 pcs.5 Installation Video]
|-
! Power Requirement| USB C 5Vdc +/-[[NASPi Gemini 3.5% , ≥4A ]] || USB C 5Vdc +/-5% , ≥4A Raspberry Pi 4B || USB C 5Vdc +/-3.5% , ≥4A || DC 5Vinch HDD/≥4A - 5.5x2.5mm jack SSD (2pcs) || DC 5VPlease refer to [https:/≥4A - 5.5x2.5mm jack || USB C 5Vdc +/-5% , ≥4A || 12Vdc +/-5% , ≥3A - 5wiki.5x2geekworm.5mm jack || DC 5Vcom/≥4A -5.5x2NASPi_Gemini_3.1mm jack || DC 5V/≥4A - 5#Installation_Video NASPi Gemini 3.5x2.5mm jack || DC 5V/≥4A - 5.5x2.5mm jackInstallation Video]
|-
! Matching Case| Already with a NUC stylc case || Already with a NUC style case || Already with a case || Model: X825-C8 || Model: X825-C6 || Model: X825[[NASPi CM4-C8 M2]] || Model: X880-C1 Raspberry Pi CM4 || No matching case M.2 SATA & M.2 NVMe(2pcs) || ModelPlease refer to [https: X828//wiki.geekworm.com/NASPi_CM4-C1 || Model: X829M2#Installation_Video NASPi CM4-C1M2 Installation Video]
|-
! Extra Cooling Solution Recommended | / [[NASPi CM4-2.5]] || / Raspberry Pi CM4 || 2.5" SATA3/SATA2/ SATA (1pcs)|| X735 || X735 || X735 || Horizontal ice tower fan || X735Please refer to [https://X708 || X735 || X735wiki.geekworm.com/X708NASPi_CM4-2.5#Installation_Video NASPi CM4-2.5 Installation Video]
|-
! Installation Video
| NASPi V1.3: https://youtu.be/RQGYf6Fqf6s || https://youtu.be/WRs7P7rLVJM || https://youtu.be/7FzZeoTBQiI || https://youtu.be/JxUNhIxXgj4 || https://youtu.be/V_-T5g-zSlY || https://youtu.be/JxUNhIxXgj4 || https://youtu.be/lXWw8xZpADk || / || https://youtu.be/FrxMfug1Zmk || X829 + X735: https://youtu.be/0oQr77aQ6rk
|}
==Raspberry pi 4 NAS Storage==
===<span style="color:red;>'''for 2.5" sata'''===
{| class="wikitable"
|-
! Product Name !! [[NASPi]] !! [[NASPi Lite]] !! [[NASPi Gemini 2.5]] V2.0!! [[X825 V2.0]] !! [[X825]] V1.5 !! <strike>[[X825v]]</strike> !! <strike>[[X880]]</strike> !! <strike>[[X883]] </strike>!! <strike>[[X828]]</strike>(Stackable) !! <strike>[[X829]]</strike>(Dual SATA)
|-
| '''Compatible with''' || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4/ 3B+/ 3B/ 2B/ B+ || raspberry pi 4
|-
| '''Socket''' || 2.5" sata HDD/SSD || 2.5" sata HDD/SSD || 2.5" sata HDD/SSD || 2.5" sata HDD/SSD || 2.5" sata HDD/SSD || 2.5" sata HDD/SSD || <span style="color:red">2.5" /3.5"</span> sata HDD/SSD || 2.5" sata HDD/SSD || <span style="color:red">one or multiple</span> 2.5" sata HDD/SSD by stack the X828 || <span style="color:red">Dual</span> 2.5" sata HDD/SSD
|-
| <span style="color:blue;font-weight:bold">Number of SSD/HDD Supported || 1 pcs || 1 pcs || <span style="color:red">1 or 2 pcs || 1 pcs || 1 pcs || 1 pcs || <span style="color:red">1 or 2 pcs || <span style="color:red">1 or 2 pcs || <span style="color:red">1+ pcs || <span style="color:red">2 pcs
|-
| '''Power Requirement''' || USB C 5Vdc +/-5% , ≥4A
||
USB C 5Vdc +/-5% , ≥4A
||
DC <span style="color:red">6-18V</span> +/-5% , ≥4A
||
* DC 5V/≥4A -<span style="color:red">5.5x2.1mm</span> jack
* USB C 5Vdc +/-5% , ≥4A
||
* DC 5V/≥4A - <span style="color:red">5.5x2.1mm</span> jack
* USB C 5Vdc +/-5% , ≥4A
||
USB C 5Vdc +/-5% , ≥4A
||
12Vdc +/-5% , ≥3A - <span style="color:red">5.5x2.1mm</span> jack
||
DC 5V/≥4A - <span style="color:red">5.5x2.1mm</span> jack
||
* DC 5V/≥4A - 5.5x2.5mm jack
* 1pc power supply for every 3pcs X828
||
DC 5V/≥4A - 5.5x2.5mm jack
|-
| '''Matching Case''' ||
* Already with a NUC stylc case
* with a 4010 <span style="color:red">PWM fan</span>
||
* Already with a NUC style case
* with a 4010 ordinary fan
||
* Already with a case
* with a 4010 <span style="color:red">PWM fan</span>
||
* Model: [[X825-C8]]
* With a power switch button
* with a 4010 ordinary fan
* For Pi 4 + X825 V2.0 + X735
||
* Model: <strike>X825-C6 </strike>
* With a power switch button
* with a 4010 ordinary fan
* For Pi 4 + X825 V1.5 + X735
||
* Model: [[X825-C8]]
* With a power switch button
* with a 4010 ordinary fan
* For Pi 4 + X825v + X735
||
* Model: [[X880-C1]]
* with a 4010 ordinary fan
||
No matching case
||
* Model: <strike>[[https://wiki.geekworm.com/X828_Case X828-C1]] </strike>
* With a power switch button
* with a 4010 ordinary fan
||
* Model: <strike>[[X829-C1]]</strike>
* With a power switch button
* with a 6010 ordinary fan
|-
| <span style="font-weight:bold">Extra Cooling Solution Recommended || / || / || / || [[X735]] || [[X735]] || [[X735]] || Horizontal [[ICE Tower Fan]] || [[X735]]/[[X708]] || [[X735]] || [[X735]]/[[X708]]
|-
| '''Installation Video''' ||
* NASPi V1.3: [https://youtu.be/RQGYf6Fqf6s Click to play]
* NASPi V1.5: [https://youtu.be/ithz2Mg5Vrc Click to play]
||
[https://youtu.be/WRs7P7rLVJM Click to play]
||
[https://youtu.be/7FzZeoTBQiI Click to play]
||
[https://youtu.be/JxUNhIxXgj4 Click to play]
||
[https://youtu.be/V_-T5g-zSlY Click to play]
||
[https://youtu.be/JxUNhIxXgj4 Click to play]
||
[https://youtu.be/lXWw8xZpADk Click to play]
|| / ||
[https://youtu.be/FrxMfug1Zmk Click to play]
||
* X829 + X735: [https://youtu.be/0oQr77aQ6rk Click to play]
* X829 + X708: [https://youtu.be/Lz2KAxhcK2E Click to play]
|-
| '''Differences'''
| colspan="3"|
* NASPi & NASPi Lite are both NUC-style aluminum case, supporting 1 SSD/HDD; NASPi Gemini is a metal case, supporting 1 or 2pcs SSDs/HDDs working at the same time, NASPi Gemini support RAID
* NASPi & NASPi Gemini support 2 micro HDMI sockets; NASPi Lite support 1 full size HDMI socket;
* NASPi and NASPi Gemini support Safe Shutdown, PWM Fan; NASPi Lite does not support Sfe Shutdown and PWM Fan
| colspan="3"|
* Functions of X825 V2.0 & X825 V1.5 & X825v are the same
* X825 V2.0 is updated from X825 V1.5，add 4 test pins to achieve which implified power supply and installation
* X825v powered via raspberry pi or X735, not from the on-board DC socket of X825v; X825 V1.5 & X825 V2.0 powered via raspberry pi or X735 or on-board DC socket
| colspan="2"|
* Both X880 & X883 support 1 or 2pcs SSD/HDD working at the same time
* X880 supports 2.5 inch and 3.5 inch；X883 only supports 2.5 inch
* X880 require 12V PSU, while X883 require 5V PSU
* X883 is more compact than X880, SSD/HDD can be directly inserted on both sides of the X883 board, while the X880 needs two other boards to carry the SSD/HDD.
| colspan="2"|
off-production
|}
===<span style="color:red;>'''for 3.5" sata'''===
{| class="wikitable"
|-
! Product Name !! <strike>[[X832]] V1.0</strike> !! <strike>[[X832]] V1.2</strike> !! <strike>[[X880]]</strike> !! [[NASPi Gemini 3.5]] !! [[X885]] !! <strike>[[X835]]</strike> (stackable)
|-
| '''Compatible with''' || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4/ 3B+/ 3B/ 2B/ B+
|-
| '''Socket''' || 3.5" sata HDD || 3.5" sata HDD || <span style="color:red">2.5" /3.5"</span> sata HDD/SSD || <span style="color:red">Dual 3.5" </span>sata HDD || <span style="color:red">Dual 3.5" </span>sata HDD || <span style="color:red">one or multiple</span> 3.5" HDD by stack the X835
|-
| <span style="color:blue">'''Number of SSD/HDD Supported'''</span> || 1 pcs || 1 pcs || <span style="color:red">2 pcs</span> || <span style="color:red">2 pcs</span> || <span style="color:red">2 pcs</span> || <span style="color:red">1+ pcs</span>
|-
| '''Power Requirement''' ||
* 12Vdc +/-5% , ≥3A - 5.5x2.1mm jack
* Power via X832 DC 12V In socket
||
* 12Vdc +/-5% , ≥3A - <span style="color:red">5.5x2.1mm</span> jack
* Power via X832 DC 12V In socket
||
12Vdc +/-5% , ≥3A - <span style="color:red">5.5x2.1mm</span> jack
||
12Vdc +/-5% , ≥3A - <span style="color:red">5.5x2.1mm</span> jack
||
12Vdc +/-5% , ≥5A - <span style="color:red">5.5x2.1mm</span> jack
||
* 12Vdc +/-5% , ≥3A - 5.5x2.5mm jack
* Power via X835 DC 12V In socket
|-
| '''Matching Case''' ||
* Model: [[X835-C1]]
* With a power switch button
* with a 4010 ordinary fan
* For Pi 4 + X832 V1.0 + X735
||
* Model: [[X832-C1]]
* With a power switch button
* with a 4010 ordinary fan
* For Pi 4 + X832 V1.2 + X735
||
* Model: [[X880-C1]]
* with a 4010 ordinary fan
||
* Already with a case
* with a 4010 PWM fan
||
Refer to NASPi Gemini 3.5 for the kit of X885 with Case and PWM Fan
||
* Model: [[X835-C1]]
* With a power switch button
* with a 4010 ordinary fan
* This case is only compatible with 1pc X835, not compatible with 2 or more X835
|-
| Extra Cooling Solution Recommended || [[X735]] || [[X735]] || Horizontal [[ICE Tower Fan]] || / || / || [[X735]]
|-
| '''Installation Video''' || / || [https://youtu.be/yVxmb6SugJY Click to play] || [https://youtu.be/lXWw8xZpADk Click to play] || https://youtu.be/iifa9cTGqFM || / || [https://youtu.be/8jdNf4sYQkQ Click to play]
|-
| '''Differences'''
| colspan="6"|
* X832 V1.0 and X832 V2.0 only support one HDD.
* X880 / X885 / NASPi Gemini 3.5 supports 1 or 2 HDDs to be used at the same time;
* X835 supports stacking to use one or multiple HDDs at the same time;
*
* X832 V2.0 updated from V1.0, adding 4 test pins, which simplifies power supply and installation, and the DC jack is also changed from 5525 to 5521
* X885 is the single board, NASPi Gemini 3.5 is composed of X885 single board + Case + 4010 3Pin PWM fan;
* X835 compatible with raspberry pi 4/ 3B+/ 3B/ 2B/ B+, X832 V1.0 / X832 V1.2 / X880/X885/NASPi Gemini 3.5 only compatible with raspberry pi 4
|}
                   {| class="wikitable collapsible"|+Raspberry pi 4 NAS Storage Family! Item !! colspan="3"|<span style="color:red;font-weight:bold">2.5"</span> SATA SSD/HDD !! colspan="2"| <span style="color:red;font-weight:bold">3.5"</span> SATA HDD !! <span style="color:red;font-weight:bold">'''for mSATA</span> SSD !! <span style="color:#ff00ff;font-weight:bold">, NVMe , M.2</span> SSD !! <span styleKey-B NGFF'''==={| class="color:#ff0000;font-weight:boldwikitable">NGFF M.2</span> SSD
|-
! Product Name| !! [[X825|X825 V1.x X825 X857 V2.x0]] || <strike>!! [[X828]] </strike><span style="color:red>(Stackable)</span> || [[X829]]<span style="color:red>(Dual SATA)</span> || <strike>[[X835]]</strike> || [[X832]] || [[X857 | X857 V1.x X857 X862 V2.x]]/ <strike>[[X8560]]</strike>/ <strike>!![[X855X863]]</strike> || <strike>!![[X872]]</strike>/[[X873]] || [[X862X876]]
|-
! | '''Compatible with| raspberry pi 4 || raspberry pi 4/ 3B+/ 3B/ 2B/ B+ || raspberry pi 4 || raspberry pi 4/ 3B+/ 3B/ 2B/ B+ ''' || raspberry pi 4 || raspberry pi 4 || raspberry pi 4 || raspberry pi 4
|-
! Interface/| '''Socket ''' || 2.5" sata HDD/mSATA SSD || <span style="color:red>one or multiple</span> 2M.5" sata HDD/SSD by stack the X828 || <span style="color:red>Dual</span> 2.5" sata HDD/SSD || * <span style="color:red>one or multiple</span> 3.5" HDD by stack the X835 || 3.5" sata HDD || mSATA Key-B NGFF SSD 2280 || M.2 NVMe Key-B NGFF SSD 2280, 2260, 2242, 2230 || M.2 NGFF Key-M NVMe 2280/2260/2242/2230
|-
! <span style="color:blue>| '''Number of SSD/HDD</span>| 1 pcs || <span style="color:red;font-weight:bold">1+ pcs</span> || <span style="color:red;font-weight:bold">2 pcs</span> || <span style="color:red;font-weight:bold">1+ pcs</span> Supported''' || 1 pcs || 1 pcs || 1 pcs || 1 pcs
|-
! | '''Power Requirement''' || DC 5VUSB C 5Vdc +/≥4A - 5.5x2.5mm jack % , ≥4A || * DC 5VUSB C 5Vdc +/≥4A - 5.5x2.5mm jack * 1pc power supply for every 3pcs X828 || DC 5V/% , ≥4A - 5.5x2.5mm jack || * DC 12VUSB C 5Vdc +/≥3A - 5.5x2.5mm jack* <span style="color:red>Must be powered by X835 DC 12V port</span> % , ≥4A || * DC 12VUSB C 5Vdc +/≥3A - 5.5x2.5mm jack* <span style="color:red>Must be powered by X832 DC 12V port</span> || Powered via Pi's USB port || Powered via Pi's USB port || Powered via Pi's USB port% , ≥4A
|-
! | '''Matching Case| * Model: X825-C6* For Pi 4 + X825 + X735* With Power Switch* With Cooling Fan ''' || * Model: X828-C1* For Pi 4 + <span style="color:red>2pcs</span> X828 + X735* With Power Switch* With Cooling Fan || * Model: X829-C1* For Pi 4 + X829 + X735/U100 UPS/X708 UPS* With Power Switch<span style="color:red>(must connect to X735/U100/X708)</span>* With Cooling Fan || * Model: X835[[X857-C1* For Pi 4 + <span style="color:red>1pcs</span> X835/X832 + X735* With Power Switch* With Cooling Fan || * Model: X835-C1* For Pi 4 + <span style="color:red>1pcs</span> X835/X832 + X735C3]] * With Power Switch4010 cooling fan * With Cooling Fan|| * Model: X857-C1* For Pi 4 + X857/X856/X855/X862/X872 + X735/U100 UPS/X708 UPS* With Power Switch<span style="color:red>a power switch button(must connect to X735/U100/X708)</span>* With Cooling Fan
||
* Model: [[X857-C1C3]] * For Pi 4 + X857/X856/X855/X862/X872 + X735/U100 UPS/X708 UPSWith 4010 cooling fan * With Power Switch<span style="color:red>a power switch button(must connect to X735/U100/X708)</span>* With Cooling Fan
||
* Model: X857[[X863-C1]]* For Pi 4 + X857/X856/X855/X862/X872 + X735/U100 UPS/X708 UPS|| * With Power Switch<span style="colorModel:red>(must connect to X735/U100/X708)</span>* With Cooling Fan[[X863-C1]]
|-
! PCB Size| 10.7 x 8.5 cm || 10.7 x 8.5 cm '''Extra Cooling Solution Recommended''' || 11.5*9 cm || 16.3 x 10.1 cm || 16.3 x 10.1 cm [[X735]]/[[X708]] || 8.5 x 5.6 cm [[X735]]/[[X708]] || 8.5 x 5.6 cm [[X732]] || 8.5 x 5.6 cm [[X732]]
|-
! | '''Installation Video| [https://youtu.be/V_-T5g-zSlY Click to play] ''' || [https://youtu.be/FrxMfug1Zmk Click to play] || [https://youtu.be/GQm6IXL759M Click to play] || [https://youtu.be/8jdNf4sYQkQ Click to play] || [https://youtu.be/8jdNf4sYQkQ TrQwcPBU9S0 Click to play] || [https://youtu.be/TrQwcPBU9S0 Click to play] || [https://youtu.be/TrQwcPBU9S0 fapPM632OOI Click to play] || [https://youtu.be/TrQwcPBU9S0 fapPM632OOI Click to play]
|}
==Raspberry pi 3 NAS Storage Family==
{| class="wikitable collapsible"
|+Raspberry pi 3 NAS Storage Family
! Item !! colspan="23"|<span style="color:red;font-weight:bold">2.5"</span> SATA SSD/HDD !! <span style="color:red;font-weight:bold">3.5"</span> SATA HDD !! colspan="2"|<span style="color:red;font-weight:bold">mSATA</span> SSD !! <span style="color:red;font-weight:bold">NVMe M.2</span> SSD !! colspan="2"|<span style="color:red;font-weight:bold">NGFF M.2</span> SSD
|-
! Product Name
| [[X820]] || [[X821]] || <strike>[[X822]]</strike><span style="color:red>(Dual SATA)</span> || <strike>[[X830]] </strike> || [[X850]] || [[X852]]<span style="color:red>(Dual mSATA)</span> || <strike>[[X870]] </strike> || <strike>[[X860]]</strike> || [[X851]]
|-
! Compatible with
| raspberry pi 3B+/ 3B/ 2B/ B+/ ROCK64/ Thinker Board || raspberry pi 3B+/ 3B || raspberry pi 3B+/ 3B/ 2B/ B+/ ROCK64/ Thinker Board || raspberry pi 3B+/ 3B/ 2B/ B+/ ROCK64/ Thinker Board || raspberry pi 3B+/ 3B/ 2B/ B+ || raspberry pi 3B+/ 3B/ 2B/ B+ || raspberry pi 3B+/ 3B/ 2B/ B+ || raspberry pi 3B+/ 3B/ 2B/ B+|| raspberry pi 3B+/ 3B
|-
! Interface/Socket
| 2.5" sata HDD/SSD || 2.5" sata HDD/SSD || <span style="color:red>Dual</span> 2.5" sata HDD/SSD || 3.5" sata HDD || mSATA SSD || <span style="color:red>Dual</span> mSATA SSD || M.2 NVMe SSD 2280, 2260, 2242, 2230 || M.2 NGFF 2280/2260/2242/2230|| M.2 NGFF 2280
|-
! Power Requirement
| DC 5V/≥4A - 5.5x2.5mm 1mm jack || USB C 5Vdc +/-5% , ≥4A || DC 5V/≥4A - 5.5x2.5mm jack || DC 12V/≥3A - 5.5x2.5mm jack || Powered via Pi's USB port || DC 5V/≥4A - 5.5x2.5mm jack || Powered via Pi's USB port || Powered via Pi's USB port || Powered via Pi's USB port
|-
! Matching Case
|
* Model: [https://wiki.geekworm.com/X820_Metal_Case_V3.0_Version X820 Case]
* For X820 + X735+pi 3B+/ 3B/ 2B/ B+/ ROCK64
* With Power Switch
* With Cooling Fan
|| -No Matching Case
||
* Model: <strike>[https://wiki.geekworm.com/X830#Metal_Case X830 Case] </strike>
* For X830 + pi 3B+/ 3B/ 2B/ B+/ ROCK64
* With Power Switch
* With Cooling Fan
|| - || No Matching Case || - || - ||-
|-
! PCB Size
| 10.7 x 8.5 cm || 10.7 x 8.5 cm || 16.5 x 10.8 cm || 15.5x11.8 cm || 8.5 x 5.6 cm || 9.9 x 8.6 cm || 8.5 x 5.6 cm || 8.5 x 5.6 cm|| 82x87mm/3.22x3.42inch
|-
! Installation Video
| [https://youtube.com/watch?v=GxNKpuhVsX8 Click to play] || - || - || - || - || - || - || - || -
|}
==Nvidia Jetson nano Nano Storage Family==
{| class="wikitable collapsible"
|+ Nvidia Jetson nano Nano Storage Family! Item !! <span style="color:red;font-weight:bold">2.5"</span> SATA SSD/HDD !! <span style="color:red;font-weight:bold">mSATA</span> SSD !! <span style="color:red;font-weight:bold">NVMe M.2</span> SSD !! <span style="color:red;font-weight:bold">M.2 NGFF</span> SSD
|-
! Product Name
| [[T300]] || [[T130]] || <strike>[[T100]]</strike> || T150
|-
! Compatible with
| Nvidia Jetson Nano A02/ B01 || Nvidia Jetson Nano A02/ B01 || Nvidia Jetson Nano A02/ B01 || Nvidia Jetson Nano A02/ B01
|-
! Interface/Socket
| 2.5" sata HDD/SSD || mSATA SSD || M.2 NVMe SSD 2280, 2260, 2242, 2230|| M.2 NVMe SSD 2280, 2260, 2242, 2230 (Only only 2280 holes are already threaded.)
|-
! Power Requirement
| DC 5V/≥4A - 5.5x2.5mm 1mm jack || DC 5V/≥4A - 5.5x2.5mm jack || DC 5V/≥4A - 5.5x2.5mm jack|| Powered via Jetson Nano
|-
! Matching Case
* With Reset Switch
* Support Cooling Fan Installation(Not supplied)
||
No matching case
|-
! PCB Size
| 12.3 x 7.9 cm || 8.5 x 5.6 cm || 10 x 8 cm || 10 x 8 cm
|-
! Installation Video
| - || - || [https://youtu.be/841XHpND8Aw Click to play]|| -
|}
Retrieved from "https://wiki.geekworm.com/Special:MobileDiff/13526...20964"

Navigation menu