Changes

X728

25 bytes added, 28 May

* You can choose to charge when boot up by short "CHG EN" and stop charging at shutdown.

* Increase battery overcharge, overdischarge protection circuit, added power input surge protection circuit.

* Added power input connector, which can be used with X715 to achieve 6~60V wide voltage input.

* PCB Size change: 87x63.7mm

'''

==Features==

===FOR USE WITH===

* Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 3 Model A+ / 4 Model B/ 5 Model B

===OPERATING SYSTEM===

* On-board XH2.54 power output connectors allow to power other devices

* Reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards

Packing List:

* 1 x X728-A1 Shield

* 4 x M2.5*12 F/F Spacer

* 4 x M2.5*25 + 6 M/F Spacer

* 8 x M2.5*5 screwss

==X728-A2==

5,375

edits