Difference between revisions of "X1000"
Jump to navigation
Jump to search
Line 34: | Line 34: | ||
==User Manual== | ==User Manual== | ||
− | + | * X1000 hardware description: [[X1000 Hardware]] | |
− | *X1000 hardware description: [[X1000 Hardware]] | ||
− | |||
* X1000 software tutorials: [[NVMe SSD boot with the Raspberry Pi 5]] | * X1000 software tutorials: [[NVMe SSD boot with the Raspberry Pi 5]] | ||
* [https://datasheets.raspberrypi.com/pcie/pcie-connector-standard.pdf Raspberry pi 5 pcie connector pin out] | * [https://datasheets.raspberrypi.com/pcie/pcie-connector-standard.pdf Raspberry pi 5 pcie connector pin out] |
Revision as of 18:35, 12 December 2023
Overview
The X1000 V1.3 shield is an NVME M2 2242 SSD PIP (PCIe Peripheral Board) for the Raspberry Pi 5 that uses the new PCIE interface of the Raspberry Pi 5 to utilise the NVME M2 SSDs for fast data transfers and ultra-fast booting.
Features
- Compatible with other HAT shield;
- FFC is only 30mm length.
- Supports installation of official active coolers also;
- Dual LED Indicators:PCE: PCie - The LED will be on if the SSD is recognised; SSD - M.2 disk activity (“ACT”).
- Reserved space for POE module installation
- Supports 2230/2242 NVME M2 ssd only.
- Can Power the X1001 shield directly from the FFC PCIe ribbon (providing maximum 5W of continuous power)
- With 40pin pin header, it can automatically supply power from GPIO, avoiding the problem of insufficient power supply for ultra-large capacity SSDs.
PS:
The X1000 hardware has no limit on NVME SSD capacity, which is dependent on the Raspberry Pi OS
Test Reviews
Reter to X1001#Test Reviews
Packing List
- 1 x X1000 V1.3 NVMe SSD Shield
- 1 x PCIe FFC Cable(30mm length)
- 3 x M2.5x14.5mm F/F Spacers
- 6 x M2.5x5mm Screws
- 1 x M2x4mm Screws (to fix MVME M2 SSD)
User Manual
- X1000 hardware description: X1000 Hardware
- X1000 software tutorials: NVMe SSD boot with the Raspberry Pi 5
- Raspberry pi 5 pcie connector pin out
Enable comment auto-refresher
Anonymous user #1
Permalink |
Lisa