2,894
edits
Changes
Jump to navigation
Jump to search
We recommend that you use our 20W 5V 4A Type-C power adapter [[USB C PSU]].
Amazon US<span style="color: https://www.amazon.com/dpred;">What's the difference between [[NASPi]] and NASPi Lite?</B09J856PNDspan>
==Document==* How to Run Raspberry Pi 4 or 3 Off an SSD or Flash Drive: [[Does the X825/X855 support USB boot]]* Tutorial – How to Initialize, Partition and Format a Brand New SSD in Windows: [[File:Tutorial_Initalize_New_SSD.pdf]]* [https://www.addictivetips.com/ubuntuNASPi-linuxNASPi-tips/setLite-upCompare.jpg|900px|NASPi & NASPi-openmediavault-on-raspberry-pi-4/ How to set up OpenMediaVault on Raspberry Pi 4] Some Tips*[[Properly Mount USB Storage on Raspberry Pi]]*[[Auto Mount an NTFS USB Drive on Raspberry PiLite Compare]]* [https://github.com/raspberrypi/firmware/issues/1515 Difficulty booting from SSD drive]
==FAQ==Q0We recommend that you use our 20W 5V 4A Type-C power adapter [[USB C PSU]]. The SSD cannot start or is very slow
A： If you have a Raspberry Pi 4 and are getting bad speeds transferring data to/from USB3.0 SSDs, read this Amazon US: https://www.raspberrypiamazon.orgcom/forumsdp/viewtopic.php?t=245931B09J856PND
Q1==Packing List==* 1 x NASPi Lite alu case* 1 X X823 V1. Will the Alu case affect the WIFI?5 Shield* 1 x X-C2 V1.0 adapter board* 1 x X823-A3 metal bracket with 2Pin cooling fan* Scews pack accessories;
A==Document=====Difference between Geekworm NAS Family===Pls refer to [[GEEKWORM NAS Family]]===Some tutorials===*[[How to View/Partition/Format/Mount HDD/SSD]]*[https: As our test//raspberrytips.com/format-mount-usb-drive/ How to Format and Mount a USB drive on Raspberry Pi]* How to Run Raspberry Pi 4 or 3 Off an SSD or Flash Drive: [[Does the X825/X855 support USB boot]]* Tutorial – How to Initialize, 2Partition and Format a Brand New SSD in Windows: [[File:Tutorial_Initalize_New_SSD.pdf]]* [https://www.4G WIFI AP was usableaddictivetips. But different com/ubuntu-linux-tips/set-up-openmediavault-on-raspberry-pi-4/ How to set up OpenMediaVault on Raspberry Pi 4]*[[Properly Mount USB Storage on Raspberry Pi individuals have different degrees of WIFI interference]]*[[Auto Mount an NTFS USB Drive on Raspberry Pi]]* [https://github. As well as aluminum alloy case will interfere com/raspberrypi/firmware/issues/1515 Difficulty booting from SSD drive] ===Installation Video===For NASPi-Lite Kit with pi 4’s WIFI to a certain extentX823 V1.5(RPi4+X823 V1. So it is strongly recommend to use Ethernet or 5G AP5+X-C2 V1. You can refer to video test of 5G WIFI AP0): https://youtu.be/LKJVIBQFYXsWRs7P7rLVJM
Q25G AP WIFI Test: <span style="colorhttps:red;">What is the thickness of a 2//youtu.5" HDD/SSD that can be accommodated?</span>LKJVIBQFYXs
A{{#ev: The thickness of 2.5" HDD/SSD on the market is generally 7mm, 9.5mm, 12.5 and 15mm，You only can choose <span style="coloryoutube|https:red;">7mm or 9.5mm</span> thickness HDD/SSD, NASPi Lite is not compatible with 12.5mm and 15mm thickness 2.5" HDD/SSD.The thickness of 2.5" HDD/SSD should not exceed 9youtu.8mm. In fact, most 2.5" HDDbe/SSD on the market are only 7mm thick.LKJVIBQFYXs}}
Q3: <span style="color:red;">How to find and use the A： If you have a Raspberry Pi 4 5G wifiand are getting bad speeds transferring data to/from USB3.0 SSDs, read this https://www.raspberrypi.org/forums/viewtopic.php?</span>t=245931
A: Please refer to: [[Raspberry pi 4 can't find 5ghz wifi]]
Q7A: What As our test, 2.4G WIFI AP was usable. But different Raspberry Pi individuals have different degrees of WIFI interference. As well as aluminum alloy case will interfere with pi 4’s WIFI to a certain extent. So it is the readstrongly recommend to use Ethernet or 5G AP. You can refer to video test of 5G WIFI AP: https://youtu.be/write performance when used as a NAS?LKJVIBQFYXs
A:The read and write performance is determined by the speed of the Raspberry Pi’s USB 3 bus and SSD. It should be noted that the Raspberry Pi’s USB3 bandwidth is only 3Gbps. Normally, the R/W speed is about 300MB/S.
Q8A: Does The thickness of 2.5" HDD/SSD on the market is generally 7mm, 9.5mm, 12.5 and 15mm，You only can choose <span style="color:red;">7mm or 9.5mm</span> thickness HDD/SSD, NASPi Lite support PoE?is not compatible with 12.5mm and 15mm thickness 2.5" HDD/SSD.The thickness of 2.5" HDD/SSD should not exceed 9.8mm. In fact, most 2.5" HDD/SSD on the market are only 7mm thick.
A: According to the customer feedback(based on 2021-05-07-raspios-buster-arm64-lite), the NASPi is OK to use with PoE splitter, but make sure to use high quality PoE splitter, or the power maybe not enough to power the NASPi kit.
==Installation Video==A: Please refer to: [[Raspberry pi 4 can't find 5ghz wifi]]
5G AP WIFI TestQ5: What is the read/write performance when used as a NAS?
{{#ev:youtube|httpsA:The read and write performance is determined by the speed of the Raspberry Pi’s USB 3 bus and SSD. It should be noted that the Raspberry Pi’s USB3 bandwidth is only 3Gbps. Normally, the R/W speed is about 300MB/youtuS.be/LKJVIBQFYXs}}
Thanks for the Video from ETA Prime.
httpsQ6://youtu.be/D0-QMDYUBVkDoes the NASPi Lite support PoE?
{{#evA:youtube|https://youtuAccording to the customer feedback(based on 2021-05-07-raspios-buster-arm64-lite), the NASPi is OK to use with PoE splitter, but make sure to use high quality PoE splitter, or the power maybe not enough to power the NASPi kit.be/D0-QMDYUBVk}}
* For the heat dissipation system, we chose a relatively simple and practical heat dissipation solution: a custom metal bracket and a 4010 2pin cooling fan to achieve it.
<span style==Power supply==Power supply"color:red;">'''Note: 5Vdc +/-5% , ≥3A (Via Type-C Port of ''' The X-C2)adapter must be connected with load to operate the normal power on/off.</span>
==Features==
* Allows booting OS from your HDD/SSD for faster app opens, web serving and file copying
* <span style="color:red;">Press button switch to turn on</span>
* <span style="color:red;">Press button switch and hold for 3 seconds to force shutdown</span>
* <span style="color:red;">DO NOT</span> support software shutdown
* <span style="color:red;">DO NOT</span> support auto power on function
==How to Power==
* Power NASPi-Lite via USB-C socket of X-C2 adapter
* Power supply requirement: 5Vdc +/-5% , ≥4A
Amazon DE: https://www.amazon.de/dp/B09J4V3RYK
{{#ev:youtube|https://youtu.be/WRs7P7rLVJM}}
==FAQ==
Q1. The SSD cannot start or is very slow
Q2. Will the Alu case affect the WIFI?
Q3: <span style="color:red;">What is the thickness of a 2.5" HDD/SSD that can be accommodated?</span>
Q4: <span style==Packing List==* 1 x NASPi Lite alu case* 1 X X823 V1.5 Shield* 1 x X-C2 V1.0 adapter board* 1 x X823-A3 metal bracket with 2Pin cooling fan* Scews pack accessories"color:red;">How to find and use the Raspberry Pi 4 5G wifi?</span>
==Collect Feedback==