2,878
edits
Changes
==Installing the Operating System==
=== Flash OS onto the Micro SD card (CM4 '''without''' eMMC)===
Please refer to [https://www.raspberrypi.com/documentation/computers/getting-started.html#installing-the-operating-system Official installation tutorial]
=== Flash OS onto the NVME SSD===
You need to refer to the above steps to flash the OS into the Micro SD card, then insert the Micro SD card, turn on the device, and then click '''Applications''' =>'''Accessories''' =>'''SD Card Copier''', run the '''SD Card Copier''' program, and copy the OS to the NVME ssd as shown in the figure below.
[[File:Sd-copoer-scrot.png]]
Click '''Start''' to run. Then shut down, unplug the SD card, and restart the device.
=== Flash OS onto the eMMC of CM4 (CM4 with eMMC)?===
1. Short '''nBoot''' Pin, refer to the picture below
[[File:X635-nboot.png|700px]]
2. Connect Type-C OTG with a Type-A to Type-C cable to your computer
3. Power the device via PWR Type-C with your 5V Power adaper
4. Then rerfer to [https://www.jeffgeerling.com/blog/2020/how-flash-raspberry-pi-os-compute-module-4-emmc-usbboot this tutorial] to flash raspberry pi OS
5. Remove the jumper of '''nBoot''' after flashing is complete, then continue the following steps;
PS：If you use CM4 with eMMC, then SD card cannot be used.
==Preconfigure X635 Device for CM4==