Difference between revisions of "X306"
Jump to navigation
Jump to search
Line 14: | Line 14: | ||
* The Raspberry Pi board, power adapter are not included in the packing list. | * The Raspberry Pi board, power adapter are not included in the packing list. | ||
* Raspberry pi micro OTG port cannot be used as it is occupied by USB HUB | * Raspberry pi micro OTG port cannot be used as it is occupied by USB HUB | ||
+ | [[File:IMG-4294-diagram-1.jpg|700px|none]] | ||
+ | |||
+ | 4 Pin header function description | ||
+ | |||
+ | {| class="wikitable" | ||
+ | ! Pin !! Function | ||
+ | |- | ||
+ | ! "AL ON | ||
+ | |- | ||
+ | ! Pin 1&2" | ||
+ | | Short: Power always on, power button disabled; | ||
+ | |- | ||
+ | ! | ||
+ | | Open: Power button Press to switch on, Hold 3 seconds to switch off | ||
+ | |- | ||
+ | ! "PWR SW | ||
+ | |- | ||
+ | ! Pin 3&4" | ||
+ | | for external 2-pin momentary switch | ||
+ | |} | ||
==Features== | ==Features== |
Revision as of 17:24, 29 June 2022
Overview
X306 is a one cell 18650 UPS shield designed for Raspberry Pi zero w / 2W
It equipped with 3 standard USB-A 2.0 ports, and a USB Type C to power. The USB-A port can be used to connect external devices such as mouse, keyboard etc.
Note:
- The Raspberry Pi board, power adapter are not included in the packing list.
- Raspberry pi micro OTG port cannot be used as it is occupied by USB HUB
4 Pin header function description
Pin | Function |
---|---|
"AL ON | |
Pin 1&2" | Short: Power always on, power button disabled; |
Open: Power button Press to switch on, Hold 3 seconds to switch off | |
"PWR SW | |
Pin 3&4" | for external 2-pin momentary switch |
Features
- Ideal Uninterruptible Power Supply (UPS) solution for Raspberry Pi Zero W/2W
- Max 5.1V 4000mA Power Backup for even the most demanding Raspberry Pi set ups
- 18650 single cell battery holder
- Upto 1000mA charging current
- Integrated battery reverse polarity protection circuit
- Integrated over current protection and over voltage protection
- Intelligent automatic charging and discharging
- 4 blue LEDs indicate battery charging and discharging levels of 25%, 50% , 75% and 100%
- Red & green LEDs show the status of power on/off and charging status
- On-board push button to control power on /off (Press-ON, Hold the button pressed at least 3s -OFF)
- Ultra-low standby power consumption of μA to maximize battery life
- Integrated IN-to-SYS pass-through path to pass the input voltage to the system
- Advanced system power path management avoids frequent charging and extend battery life
- Connects to the Raspberry Pi via Pogo Pins - no wirindg & soldering required
- 4-pin header for external power swtich and always-on power option
- Equipped with three USB2.0 ports and one USB2.0 4-through-holes for more USB expansion
Specification
- Input supply voltage: 5Vdc +/-5%
- Input supply current: ≥3A
- Charging current: 900~1050mA
- Trickle charge current: 130~140mA
- Predetermined Charge voltage: 4.2V +/-1.5%
- Output voltage: 5.1V +/-5%
- Max output current: 4000mA
How to Power
Power Input: 5.1Vdc +/-5% , ≥3A (Power Via USB Type-C port of X306)
Packing List
- 1 x X306 18650 UPS Shield
- 4 x M2.5 x 5 Screws
Enable comment auto-refresher
Anonymous user #15
Permalink |
Anonymous user #14
Permalink |
Lisa
Anonymous user #13
Permalink |
Anonymous user #11
Permalink |
Walker
Anonymous user #9
Permalink |
Anonymous user #10
Anonymous user #12
Anonymous user #8
Permalink |
Anonymous user #7
Permalink |
Walker
Anonymous user #6
Permalink |
Walker
Anonymous user #5
Permalink |
Walker
Anonymous user #3
Permalink |
Anonymous user #4
Anonymous user #2
Permalink |
Lisa
Anonymous user #1
Permalink |
Lisa