Changes

#1. Install the HDDs #Please connect the X880 to your PC and keep power on.

#Switch RAID mode* 32.1 Set Please connect the switch button X880 to your preferred RAID mode(PM/RAID 0/RAID 1/SPAN) as per the RAID illustration table.* 3.2 Press the SET button for about 5 seconds, and release it till the blue LED indicators starts flashing.* 3.3 After RAID mode changed, please confirm that the PC can recognize the disk(s) properly and shows the right capacitykeep power on.

#3. Switch RAID mode* Set the switch button to your preferred RAID mode(PM/RAID 0/RAID 1/SPAN) as per the RAID illustration table.* Press the SET button for about 5 seconds, and release it till the blue LED indicators starts flashing.* After RAID mode changed, please confirm that the PC can recognize the disk(s) properly and shows the right capacity. 4. Set CLEAR RAID mode (PM, factory default setup) * 4.1 Press the SET button for about 5 seconds then and release it till blue LED indicators starts flashing.* 4.2 After above processes, the setup for CLEAR RAID is done.