2,104
edits
Changes
'''PCB Size:''' 87mm x 56mm
|}
==Test & Reviews==
'''Test Conditions'''
* System board details: Raspberry Pi 5 Model B Rev 1.0 , 4G RAM
* Interface board details: X1012 POE+NVMe Shield
* Operation system: Raspberry Pi OS with desktop (Debian12 (bookworm), 64bit, Release date: October 10th 2023)
* Storage details: Netac N930E-PRO M.2 NVMe 128GB
'''Testing the SSD speed from command line with dd'''
# To test the write speed, writing 1 GB of data in 10 blocks of 100 MB.
# To test the read speed, use dd to read our entire TestingFile file generated from the last command, in 10 blocks of 100 MB each.
'''Run at PCIe 2.0'''
[[File: X1012-test-pcie2.png | 700px]]
'''Run at PCIe 3.0'''
[[File: X1012-test-pcie3.png | 700px]]
As seen above, the final results with the dd command are:
* Write speed: 389 MB/s at PCIe 2.0, 377MB/s at PCIe 2.0
* Read speed: 730 MB/s at PCie 2.0, 700MB/s at PCIe 3.0
'''Testing disk drive read speed with hdparm'''
Run at PCIe 2.0, average read rate: 432 MB/s (3 samples)
[[File: Testing-disk-drive-read-speed-with-hdparm-pcie2.png | 700px]]
Run at PCIe 3.0, average read rate: 849.5 MB/s (3 samples)
[[File: Testing-disk-drive-read-speed-with-hdparm-pcie3.png | 700px]]
==Packing List==