Overview
The X1301 HDMI to CSI-2 bridge with I2S audio interface is a specialized product tailored for the Raspberry Pi. It is equipped with the Toshiba TC358743XBG bridge chip and a one-to-two active HDMI splitter chip, enabling support for HDMI input and HDMI Pass-Through up to 1080P at a refresh rate of 60 fps.
With the HDMI Pass-Through feature, you can seamlessly output the HDMI signal (audio/video) from various source devices such as a Blu-ray Disc player, cable box, or satellite receiver to a TV or projector for local monitoring, even when the Raspberry Pi is in standby mode.
Features
Features
For use with |
- Raspberry Pi 5B
- Raspberry Pi 4B
- Raspberry Pi 3B+
- Raspberry Pi 3B
|
Key Features |
- Capable of handling video formats up to 2K Full HD (1920x1080, 60fps)
- Supports HDMI Pass-Through for local HDMI display
- Equipped with the HDMI to CSI-2 bridge chip: Toshiba TC358743XBG
- Supports MIPI CSI-2 with 4 data lanes, each with speeds of up to 1 Gbps per lane
- Enables HDMI audio input and transmission over I²S
- Prevents HDMI backpowering to the Raspberry Pi CSI
- Features a CSI-2 connector: 22-pin FPC with 0.5mm pitch
- Designed to be attached on top, allowing stacking with other HATs
- Compatible with the HAT+ STANDBY power state, automatically turning off when the Pi 5 shuts down
- Easily mountable on the Raspberry Pi, allowing you to customize your perfect case
|
Technical Specification |
Power supply: 5Vdc via 40-pin GPIO header & 3.3Vdc via FFC
Ports & Connectors:
- HDMI video input connector x1 - Type-A 19-pin
- HDMI Pass-Through connector x1 - Type-A 19-pin
- MIPI connector x1 - 22pin 0.5mm pitch
MIPI cable length: 30mm
PCB Size: 37.5mm x 30mm
|
Packing List
User Manual
Hardware Installation
Software Installation
FAQ
Enable comment auto-refresher