440
edits
Changes
Jump to navigation
Jump to search
# You can use same one board to turn on/off all stackable boards. (be noted that which board you press the button to turn on, also must the same board to turn off.)
# Only one AL_ON jumper caps be shorted to enable Always Power On when stacked multiple x-ups1 shields.
# MUST When stacking more than 2 X-UPS1 boards, if you want to disable the 12V OUT, you have to short ALL 12 the 12V OFF jumper caps be . If one of them is not shorted to disable , the 12V output when stacked multiple x-ups1 shieldsOUT will occur.
|}
'''1. X-UPS1 V1.3 Jumper Cap & Button Switch Guidance:'''
[[File:X-ups1-IMG-5311-Jumper-Cap-1.jpg|750px|Jumper Cap & Button Switch Function]]
'''2. Guide based on the Raspberry Pi 5;'''