View source for X750

[[File:X750-Interface-schematic-w1000.jpg|thumb|right|X750]]
[[File:X750-IMG-6454.jpg|thumb|right|X750]]
[[File:X750-IMG-6464-power_supply_requirement.jpg|thumb|right|X750-power supply requirement]]
[[File:X750-IMG-6464.jpg|thumb|right|X750]]
[[File:X750-IMG-6462.jpg|thumb|right|X750]]
[[File:X750-A1-IMG-6470.jpg|thumb|right|X750-A2]]
[[File:X750-PCB.png|thumb|right|X750 PCB LAYOUT]]
[[File:X750-daughtor-board.png|thumb|right|X750 daughter board, read cable is pin 8]]

{{GD Template Impl}}
==Overview==
'''Note''': Sold out and no longer in production. Please refer to [[X728]]

* The X750 is a multi-functional expansion board for all current models of the Raspberry Pi using a 40 pin header. It provides intelligent and safe power management, safe shutdown, full power off through software and an advanced uninterruptible power supply. 

* The X750 reserves the 40-pin header that can be stacked with other Raspberry Pi accessory boards for enhanced applications, and it's the high-end product of the Geekworm UPS family.

* Important Note: The X750-A2 must be use with X750 18650 UPS HAT Shield, it is no use if you just purchase the X750-A2 board.


'''SAFETY INSTRUCTIONS AND WARNINGS'''		 	 	
* You must read these safety instructions and warnings before charging your batteries. 
* Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the below instructions may result in fire, personal injury and damage to property if charged or used improperly. 
* Never make wrong polarity connection when charging and discharging battery packs. Always double check polarity of battery's connector to make sure "+" to "+" and "-" to "-". 
* Do not mix and use old batteries and new batteries, or batteries with different brand names. 
* Lithium batteries has it's cycle life, please replace old battery with new one when it reaches it's service life or when it is two year old, whichever comes first. 
* When charging Battery Pack, please put battery in a fire proof container. Please don't leave the X700 on the wood material or carpet and unattended. 
* Must keep the X700 away from children. 
* Please watch Main Video and Tutorial Video regarding 18650 batteries at: https://www.staysafebattery.com/en/

==Features==
<html>

<head>

<style>
	tr
	{mso-height-source:auto;
	mso-ruby-visibility:none;}
col
	{mso-width-source:auto;
	mso-ruby-visibility:none;}
br
	{mso-data-placement:same-cell;}
ruby
	{ruby-align:left;}
.style0
	{mso-number-format:General;
	text-align:general;
	vertical-align:middle;
	white-space:nowrap;
	mso-rotate:0;
	mso-background-source:auto;
	mso-pattern:auto;
	color:black;
	font-size:11.0pt;
	font-weight:400;
	font-style:normal;
	text-decoration:none;
	font-family:宋体;
	mso-generic-font-family:auto;
	mso-font-charset:134;
	border:none;
	mso-protection:locked visible;
	mso-style-name:常规;
	mso-style-id:0;}
.font0
	{color:black;
	font-size:11.0pt;
	font-weight:400;
	font-style:normal;
	text-decoration:none;
	font-family:宋体;
	mso-generic-font-family:auto;
	mso-font-charset:134;}
.font6
	{color:black;
	font-size:11.0pt;
	font-weight:700;
	font-style:normal;
	text-decoration:none;
	font-family:宋体;
	mso-generic-font-family:auto;
	mso-font-charset:134;}
td
	{mso-style-parent:style0;
	padding-top:1px;
	padding-right:1px;
	padding-left:1px;
	mso-ignore:padding;
	color:black;
	font-size:11.0pt;
	font-weight:400;
	font-style:normal;
	text-decoration:none;
	font-family:宋体;
	mso-generic-font-family:auto;
	mso-font-charset:134;
	mso-number-format:General;
	text-align:general;
	vertical-align:middle;
	border:none;
	mso-background-source:auto;
	mso-pattern:auto;
	mso-protection:locked visible;
	white-space:nowrap;
	mso-rotate:0;}
.xl65
	{mso-style-parent:style0;
	border:.5pt solid windowtext;}
.xl66
	{mso-style-parent:style0;
	border:.5pt solid windowtext;
	white-space:normal;}
.xl67
	{mso-style-parent:style0;
	font-weight:700;
	border:.5pt solid windowtext;}
.xl68
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border:.5pt solid windowtext;
	background:#D8D8D8;
	mso-pattern:black none;}
.xl69
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border:.5pt solid windowtext;}
.xl70
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border:.5pt solid windowtext;
	white-space:normal;}
.xl71
	{mso-style-parent:style0;
	color:red;
	font-weight:700;
	text-align:center;
	border-top:.5pt solid windowtext;
	border-right:none;
	border-bottom:.5pt solid windowtext;
	border-left:.5pt solid windowtext;}
.xl72
	{mso-style-parent:style0;
	color:red;
	font-weight:700;
	text-align:center;
	border-top:.5pt solid windowtext;
	border-right:.5pt solid windowtext;
	border-bottom:.5pt solid windowtext;
	border-left:none;}
.xl73
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border-top:.5pt solid windowtext;
	border-right:.5pt solid windowtext;
	border-bottom:none;
	border-left:.5pt solid windowtext;}
.xl74
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border-top:none;
	border-right:.5pt solid windowtext;
	border-bottom:none;
	border-left:.5pt solid windowtext;}
.xl75
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border-top:none;
	border-right:.5pt solid windowtext;
	border-bottom:.5pt solid windowtext;
	border-left:.5pt solid windowtext;}
.xl76
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border-top:.5pt solid windowtext;
	border-right:none;
	border-bottom:.5pt solid windowtext;
	border-left:.5pt solid windowtext;
	white-space:normal;}
.xl77
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border-top:.5pt solid windowtext;
	border-right:.5pt solid windowtext;
	border-bottom:.5pt solid windowtext;
	border-left:none;
	white-space:normal;}
.xl78
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border-top:.5pt solid windowtext;
	border-right:none;
	border-bottom:none;
	border-left:.5pt solid windowtext;}
.xl79
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border-top:none;
	border-right:none;
	border-bottom:none;
	border-left:.5pt solid windowtext;}
.xl80
	{mso-style-parent:style0;
	font-weight:700;
	text-align:center;
	border-top:none;
	border-right:none;
	border-bottom:.5pt solid windowtext;
	border-left:.5pt solid windowtext;}
.xl81
	{mso-style-parent:style0;
	text-align:center;
	border:.5pt solid windowtext;
	background:#D8D8D8;
	mso-pattern:black none;}
.xl82
	{mso-style-parent:style0;
	mso-number-format:"\@";
	text-align:left;
	border:.5pt solid windowtext;}
.xl83
	{mso-style-parent:style0;
	text-align:left;
	border:.5pt solid windowtext;}

<!--table
	{mso-displayed-decimal-separator:"\.";
	mso-displayed-thousand-separator:"\,";}
@page
	{margin:.75in .7in .75in .7in;
	mso-header-margin:.3in;
	mso-footer-margin:.3in;}
ruby
	{ruby-align:left;}
rt
	{color:windowtext;
	font-size:9.0pt;
	font-weight:400;
	font-style:normal;
	text-decoration:none;
	font-family:宋体;
	mso-generic-font-family:auto;
	mso-font-charset:134;
	mso-char-type:none;
	display:none;}
-->
</style>
<![if !supportTabStrip]><script language="JavaScript">
<!--
function fnUpdateTabs()
 {
  if (parent.window.g_iIEVer>=4) {
   if (parent.document.readyState=="complete"
    && parent.frames['frTabs'].document.readyState=="complete")
   parent.fnSetActiveSheet(0);
  else
   window.setTimeout("fnUpdateTabs();",150);
 }
}

if (window.name!="frSheet")
 window.location.replace("../X750-Features.htm");
else
 fnUpdateTabs();
//-->
</script>
<![endif]>
</head>

<body link=blue vlink=purple>

<table border=0 cellpadding=0 cellspacing=0 width=1118 style='border-collapse:
 collapse;table-layout:fixed;width:840pt'>
 <col width=186 style='mso-width-source:userset;mso-width-alt:5952;width:140pt'>
 <col width=166 style='mso-width-source:userset;mso-width-alt:5312;width:125pt'>
 <col width=766 style='mso-width-source:userset;mso-width-alt:24512;width:575pt'>
 <tr height=26 style='mso-height-source:userset;height:20.1pt'>
  <td colspan=2 height=26 class=xl68 width=352 style='height:20.1pt;width:265pt'>ITEM</td>
  <td class=xl68 width=766 style='border-left:none;width:575pt'>DESCRIPTION</td>
 </tr>
 <tr height=26 style='mso-height-source:userset;height:20.1pt'>
  <td colspan=2 height=26 class=xl69 style='height:20.1pt'>FOR USE WITH</td>
  <td class=xl65 style='border-top:none;border-left:none'>Raspberry Pi 4 Model
  B/3B+/3B/2B/A+/B+</td>
 </tr>
 <tr height=76 style='mso-height-source:userset;height:57.0pt'>
  <td colspan=2 height=76 class=xl69 style='height:57.0pt'>OPERATING SYSTEM</td>
  <td class=xl66 width=766 style='border-top:none;border-left:none;width:575pt'>·
  Raspbian Stretch<br>
    · Safe shutdown function tested for Raspbian, other operating systems NOT to be tested and advised</td>
 </tr>
 <tr height=316 style='mso-height-source:userset;height:237.0pt'>
  <td rowspan=3 height=691 class=xl73 style='border-bottom:.5pt solid black;
  height:518.25pt;border-top:none'>KEY FEATURES</td>
  <td class=xl70 width=166 style='border-top:none;border-left:none;width:125pt'><br>
    <br>
    UPS Function</td>
  <td class=xl66 width=766 style='border-top:none;border-left:none;width:575pt'>·
  Smart and powerful Uninterruptible Power Supply (UPS)<br>
    · Provides continuous operations for up to 10~30hours (depending on battery
  type and qty used)<br>
    · Max 5.1V 8000mA Power Backup for even the most demanding RPi set
  ups<br>
    · Four 18650 Cells Lithium Ion Holder, can work with only two or three or
  four 18650 Lithium Ion batteries<br>
    · Can work with X750-A2 4-cell battery holder to increase battery capacity
  up to 38400mAh (12 18650 batteries)<br>
    · Supports 2A via micro-USB socket or 3A via DC jack fast charging<br>
    · Integrated battery protection circuit<br>
    · Integrated over current protection and over voltage protection<br>
    · Integrated Maxim's fuel-gauge systems (Reading battery voltage and
  percentage via i2c) - Cabling required<br>
    · Integrated 10-A fully-integrated synchronous boost converter<br>
    · Intelligent automatic charging and discharging<br>
    · On-board 4 green LEDs indicate battery charging and discharging levels of
  25%, 50% , 75% and 100%<br>
    · On-board blue LED show the status of power on/off</td>
 </tr>
 <tr height=267 style='mso-height-source:userset;height:200.25pt'>
  <td height=267 class=xl67 style='height:200.25pt;border-top:none;border-left:
  none'>Safe power managem<span style='display:none'>ent</span></td>
  <td class=xl66 width=766 style='border-top:none;border-left:none;width:575pt'>·
  Equipped with momentary button for easy power control<br>
    <span style='mso-spacerun:yes'>&nbsp; </span>Press the button to turn
  on<br>
    <span style='mso-spacerun:yes'>&nbsp; </span>Press the button and hold for
  1~2seconds to reboot<br>
    <span style='mso-spacerun:yes'>&nbsp; </span>Press the button and hold for
  3~7seconds to implement safe shutdown<br>
    <span style='mso-spacerun:yes'>&nbsp;</span>Press the button and hold for
  &gt;8seconds to force shutdown<br>
    · Supports safe shutdown and full poweroff through software<br>
    · On-board blue LED shows the status of power on, reboot and shutdown<br>
    · On-board pin header to select auto power-on when power supplied or
  battery installed<br>
    · Ultra-low standby power consumption of μA to maximize battery life<br>
    · Operate in both charge mode and boost mode to allow full system
  management and battery power management<br>
    · Advanced system power path management avoids frequent charging and extend
  battery life<br>
    · Advanced system power path management allows 3A fast charging and
  powering Raspberry Pi at the same time<br>
    · Powers the Raspberry Pi via the 40-pin header - no additional cabling
  required<br>
    · On-board DC power jack (5.5*2.5mm) and XH2.54 connector convenient for
  power input<br>
    · On-board PH2.0 connector allows to connect external power switch and DIY
  your perfect case<br>
    · On-board XH2.54 power output connectors allow to<span
  style='mso-spacerun:yes'>&nbsp; </span>power other devices<br>
    · Mounting holes and standoffs provide mechanical stability of the
  Raspberry Pi and X750 assembly</td>
 </tr>
 <tr height=108 style='height:81.0pt'>
  <td height=108 class=xl69 style='height:81.0pt;border-top:none;border-left:
  none'>X751-A2</td>
  <td class=xl66 width=766 style='border-top:none;border-left:none;width:575pt'>·
  With four 18650 cells Lithium Ion holder<br>
    · Ideal solution to increase battery capacity (total battery capacity up to
  38400mAh, 12 18650 batteries)<br>
    · Integrated battery protection circuit<br>
    · Mounting holes and standoffs provide mechanical stability of the
  Raspberry Pi, X750 and X750-A2 assembly</td>
 </tr>
 <tr height=18 style='height:13.5pt'>
  <td rowspan=7 height=126 class=xl78 style='border-bottom:.5pt solid black;
  height:94.5pt;border-top:none'>Pins and GPIO used</td>
  <td class=xl81 style='border-top:none'><font class="font6">Pin No.</font><font
  class="font0"><span style='mso-spacerun:yes'>&nbsp;</span></font></td>
  <td class=xl68 style='border-top:none;border-left:none'>Usage</td>
 </tr>
 <tr height=18 style='height:13.5pt'>
  <td height=18 class=xl69 style='height:13.5pt;border-top:none'>2,4</td>
  <td class=xl82 style='border-top:none;border-left:none'>+5V power supply</td>
 </tr>
 <tr height=18 style='height:13.5pt'>
  <td height=18 class=xl69 style='height:13.5pt;border-top:none'>3,5</td>
  <td class=xl83 style='border-top:none;border-left:none'>I2C for UPS battery
  voltage and percentage reading</td>
 </tr>
 <tr height=18 style='height:13.5pt'>
  <td height=18 class=xl69 style='height:13.5pt;border-top:none'>6</td>
  <td class=xl83 style='border-top:none;border-left:none'>Ground</td>
 </tr>
 <tr height=18 style='height:13.5pt'>
  <td height=18 class=xl69 style='height:13.5pt;border-top:none'>7</td>
  <td class=xl83 style='border-top:none;border-left:none'>GPIO4 for power
  management</td>
 </tr>
 <tr height=18 style='height:13.5pt'>
  <td height=18 class=xl69 style='height:13.5pt;border-top:none'>11</td>
  <td class=xl83 style='border-top:none;border-left:none'>GPIO17 for power
  management</td>
 </tr>
 <tr height=18 style='height:13.5pt'>
  <td height=18 class=xl69 style='height:13.5pt;border-top:none'>12</td>
  <td class=xl83 style='border-top:none;border-left:none'>GPIO18 for power
  management</td>
 </tr>
 <tr height=108 style='height:81.0pt'>
  <td colspan=2 height=108 class=xl76 width=352 style='border-right:.5pt solid black;
  height:81.0pt;width:265pt'>POWER SUPPLY</td>
  <td class=xl66 width=766 style='border-top:none;border-left:none;width:575pt'>·
  Via Micro-USB socket: 4.7~5.5Vdc, 2.5A;<br>
    · Via DC power jack: 4.7~5.5Vdc ±5%, ≥4A<br>
    · UPS output : 5.1V ±5% Max 8A<br>
    · UPS charging current: 2A via Micro-USB socket, 3A via DC jack<br>
    · Terminal Battery Voltage : 4.2V<br>
    · Recharge Threshold : 4.1V</td>
 </tr>
 <tr height=62 style='mso-height-source:userset;height:46.5pt'>
  <td colspan=2 height=62 class=xl71 style='border-right:.5pt solid black;
  height:46.5pt'>NOTE</td>
  <td class=xl66 width=766 style='border-top:none;border-left:none;width:575pt'>·
  Advanced power path management only enabled when applying power to the DC power
  jack<br>
    · Do not apply power to your Raspberry Pi via the Micro USB socket or
  Type-C socket.<br>
    · Do not use 18650 battery with built-in protection circuit</td>
 </tr>
 <![if supportMisalignedColumns]>
 <tr height=0 style='display:none'>
  <td width=186 style='width:140pt'></td>
  <td width=166 style='width:125pt'></td>
  <td width=766 style='width:575pt'></td>
 </tr>
 <![endif]>
</table>

</body>

</html>

==Packing List==
* 1 x X750 Expansion Board
* 1 x GPIO and power daughterboard
* 1 x 8-pin connection cable
* 8 x Screw M2.5*5 mm
* 2 x Spacer M/F M2.5*22+6 mm
* 2 x Spacer F/F M2.5*22mm

==X750-A2==
With four 18650 cells Lithium Ion holder
* Ideal solution to increase battery capacity (total battery capacity up to 38400mAh, 12 18650 batteries)
* Integrated battery protection circuit
* Mounting holes and standoffs provide mechanical stability of the Raspberry Pi, X750 and X750-A2 assembly

===Packing List===
* 1 x X750-A2 Board
* 1 x XH2.5 2Pin connector (Cable: 10cm/3.93inch)
* 1 x Install Screws Pack

==User Manual==
*[[X750 Sofrware]]
*[[X750 Hardware]]
* [https://datasheets.maximintegrated.com/en/ds/MAX17040-MAX17041.pdf I2C MAX17040-MAX17041] 
*[[File:IP5310-datasheet-en.pdf|IP5310 Battery management chip datasheet-English version]]
*[[File:IP5310-datasheet-cn.pdf|IP5310 Battery management chip datasheet-Chinese version]]
* Scripts to https://github.com/geekworm-com/x750
Or [[How to read the battery capacity via I2C on X750&725]]
'''x750'''

This is the safe shutdown & reading Battery voltage and capacity script for x750

* [https://geekworm.com/ https://geekworm.com]
* [https://geekworm.aliexpress.com/ https://geekworm.aliexpress.com]
* [https://www.amazon.com/shops/geekworm https://www.amazon.com/shops/geekworm]
* <nowiki>Email:support@geekworm.com</nowiki>

Customers often ask if we support automatic and safe shutdown at low battery capacity? Our suggestion is: You can refer to the A file and the B file to program this idea yourself: The idea is to read the current voltage or battery capacity cyclically, and then judge the program to execute the automatic shutdown command when it is low or low voltage, of course This low battery or low voltage value is an empirical value, and you can specify it yourself in the program.


'''How to Connect the X750 with our Momentary Switch & Latching Switch'''

[[File:X750+Momentary-Switch.jpg|800px|How to connect X750 with momentary switch]]
[[File:X750+Latchig-Switch.jpg|800px|How to connect X750 with latching switch]]

==FAQ==
Q: 1. Will the X750-A2 stackable? Can we double or triple or more X750-A2 to hold 12/16 batteries?

A: No limit to X750-A2,you can stack mutiple X750-A2 to hold and add more batteries. But '''please note''' that the charging current is only about '''2.5A''', so the charging speed will be become slow if you stack mutiple X750-A2.


Q: 2. Will X750 have an auto shutdown if the battery is low? 

A: Sorry no, the X750 does not support an auto shutdown if the battery is low.


Q: 3. How many Amps can be used on each of the various XH2.54 5V Output connectors?? 

A: All 5v output connectors are connected together and they can deliver total 8A output.


Q: 4. What is the pinout for the PWR Switch?

A: Please refer to here: [[PH2.0 Conector Specification]]


Q: 5. Does the X725/X750 support to use with X735 together?

A: Sorry, no, the X725/X750 does not support to use with X735 power management board, please do not use them togehter.


Q: 6. Can X750 provide enough power supply when PI 4 is overclocked to 2.0ghz?

A: No problem, X750 can output current up to 8A


Q: 7.How to remove/unload the X750 script from your Pi?

A: Open the /etc/rc.local file (sudo nano /etc/rc.local or vim /etc/rc.local to open the /etc/rc.local file;), and seach x750, then comment out that line (add # on the begin of that line);


Q: 8.Does the X725/X750/X705 support power failure detection?

A: No, the X725/X750/X705 dose not support power failure detection.


Q: 9.Does the X750 support to use with [[X835]]?

A: No,not support. They requires different power supply voltage, can't use togehter.


Q: 10.X750 is not compatible with adafruit 3.5" touchscreen problem

A: Please refer to https://geekworm.com/community/forum/topic/12496/x750-pinout


Q: 11.Why do not use 18650 battery with built-in protection circuit for X750?

A: The X750 has an onboard fuse, if the battery can be installed, you can directly use the battery with protection circuit, but the output power may be affected.

<!--增加评论功能！ -->
<comments />

<!--请选择合适的分类，多余的分类请删除； -->

[[Category:Product Manual]]
[[Category:Raspberry pi]]