GPS Module SKU:384916
Jump to navigation Jump to search
GPS Module w/ Ceramic Passive Antenna for Raspberry Pi / Arduino
- Use U-BLOX NEO-6M modules, high performance;
- With ceramic antennas;
- Set parameters via serial port, and can be saved into the EEPROM;
- Compatible with 3.3V/5V level, easily connect to other single-chip microcomputer system;
- With backup rechargeable battery, battery can last about half hour after the power is shut down. you can keep the calendar data.
Note: Because the TXD and RXD pin are be connected a 510ohm resistance to compatible with 3.3V/5V, so you need to use the low resistance cable to connect (example: some USB TTL cables will lead to error).
- 1 x GPS module