2,262
edits
Changes
Jump to navigation
Jump to search
Created page with "{{GD Template Impl}} ==Overview== ==Features== ===FOR USE WITH=== * Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 4 Model B ===OPERATING SYSTEM=== * Moode A..."
{{GD Template Impl}}
==Overview==
==Features==
===FOR USE WITH===
* Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 4 Model B
===OPERATING SYSTEM===
* Moode Audio Player
* OSMC
* Openelec
* Raspbian Jessie
* Volumio
* Pi Core Player
===KEY FEATURES===
* Full-HD audio – up to 24-bit/192kHz playback
* Audiophile ESS Technology Sabre premier stereo DAC ES9023
* ES9023 delivers jitter-free studio quality audio with 112dB DNR
* Built in High quality Class-D stereo audio amplifiers (TI TPA3118D2)
* Up to 2×30W Into a 8-Ω BTL Load at 24Vdc
* Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
* Uses the Texas Instruments ultra-low-noise voltage regulator (output noise< 10μVRMS)
* Uses the Texas Instruments high efficiency step-Down DC converter (up to 95%)
* 6V~26Vdc converted to 5.1V, 3A to power the Raspberry Pi
* Uses the genuine ALPS RK163 series potentiometer for smooth volume adjustment
* Onboard pluggable speaker screw terminals
* Onboard XH2.54 connector providing 5V output to power other devices
* Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
* Pop-noise can be improved by enabling GPIO control
* AMP can be enabled / disabled with jumper link
* Compatible with X710 for intelligent power mgmt and cooling your amplifier (See notes1)
* Compatible with X850 for mSATA SSD storage expansion (See notes 2)
* Compatible with X872 for M.2 NVME SSD storage expansion (See notes2)
* Compatible with X860 for M.2 SATA SSD storage expansion (See notes2)
===SPECIFICATION===
* Power supply: 6-26Vdc，≥3A recommended
* GPIO used : LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22
* RCA Analog audio output level : 2V RMS
* Amplifier max output power: 2×30W at 4Ω BTL Load at 24Vdc
* Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
* PCB size 85 x 57mm
===NOTES===
1) Additional M2.5*20 M/F spacers & 2-pin XH2.54 cable required (not supplied)
2) Additional M2.5*8 M/F spacers required (not supplied)
Don't power your Raspberry Pi via the Pi's 40-pin header and Type-C or Micro USB socket at the same time
==Packing List==
* X5500 Expansion Board x 1
* Screw M2.5 *6mm x 8
* Spacer F/F M2.5 *20mm x 4
==Document==
==FAQ==
<!--增加评论功能！ -->
<comments />
[[Category:Product Manual]]
[[Category:Raspberry pi]]
==Overview==
==Features==
===FOR USE WITH===
* Raspberry Pi 1 Model B+/ 2 Model B / 3 Model B / 3 Model B+ / 4 Model B
===OPERATING SYSTEM===
* Moode Audio Player
* OSMC
* Openelec
* Raspbian Jessie
* Volumio
* Pi Core Player
===KEY FEATURES===
* Full-HD audio – up to 24-bit/192kHz playback
* Audiophile ESS Technology Sabre premier stereo DAC ES9023
* ES9023 delivers jitter-free studio quality audio with 112dB DNR
* Built in High quality Class-D stereo audio amplifiers (TI TPA3118D2)
* Up to 2×30W Into a 8-Ω BTL Load at 24Vdc
* Capable of driving 4 Ohm speakers (also works with higher impedance speakers)
* Uses the Texas Instruments ultra-low-noise voltage regulator (output noise< 10μVRMS)
* Uses the Texas Instruments high efficiency step-Down DC converter (up to 95%)
* 6V~26Vdc converted to 5.1V, 3A to power the Raspberry Pi
* Uses the genuine ALPS RK163 series potentiometer for smooth volume adjustment
* Onboard pluggable speaker screw terminals
* Onboard XH2.54 connector providing 5V output to power other devices
* Uses the digital I2S audio signals to reduce CPU load over USB audio solutions
* Pop-noise can be improved by enabling GPIO control
* AMP can be enabled / disabled with jumper link
* Compatible with X710 for intelligent power mgmt and cooling your amplifier (See notes1)
* Compatible with X850 for mSATA SSD storage expansion (See notes 2)
* Compatible with X872 for M.2 NVME SSD storage expansion (See notes2)
* Compatible with X860 for M.2 SATA SSD storage expansion (See notes2)
===SPECIFICATION===
* Power supply: 6-26Vdc，≥3A recommended
* GPIO used : LRCK - IO19, BCK - IO18, DATA - IO21, IR - IO26, AMP mute - IO22
* RCA Analog audio output level : 2V RMS
* Amplifier max output power: 2×30W at 4Ω BTL Load at 24Vdc
* Resolution/Sampling Rate: upto 24bit / 192KHz (Raspberry Pi I2S)
* PCB size 85 x 57mm
===NOTES===
1) Additional M2.5*20 M/F spacers & 2-pin XH2.54 cable required (not supplied)
2) Additional M2.5*8 M/F spacers required (not supplied)
Don't power your Raspberry Pi via the Pi's 40-pin header and Type-C or Micro USB socket at the same time
==Packing List==
* X5500 Expansion Board x 1
* Screw M2.5 *6mm x 8
* Spacer F/F M2.5 *20mm x 4
==Document==
==FAQ==
<!--增加评论功能！ -->
<comments />
[[Category:Product Manual]]
[[Category:Raspberry pi]]