8,941
edits
Changes
Jump to navigation
Jump to search
X105
,Created page with "X105 Full Function Expansion Board (SKU:370706) This expansion board is suitable for Raspberry Pi Model B+; Recommended Power Supplies : 110~240VAC input, 12V DC 2A output;..."
X105 Full Function Expansion Board (SKU:370706)
This expansion board is suitable for Raspberry Pi Model B+;
Recommended Power Supplies : 110~240VAC input, 12V DC 2A output;
KEY FEATURES:
Input Voltage:
*6V to 23Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi;
VGA output:
*HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC;
RS232 serial communication:
*Control the Raspberry Pi over RS232 or connect to external serial accessories;
USB Storage:
*Self-powered USB hub with 3 ports;
Real-time clock (RTC):
*Based on DS3231SN with included CR2032 battery;
MicroSD Card Reader/Writer:
*Supports microSD / microSDHC / microSDXC;
*Convenient to write OS image;
Misc:
*Power output socket;
*Camera flex slot so camera can still be used with the expansion board attached;
*DIP switch to remove connection from RPi’s pin header;
*Directly connected on top of the Raspberry Pi using the board GPIO header pins;
*No wiring nor soldering is required;
*Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards;
Packing List
*1 x Expansion Board (Included 1 x CR2032 battery)
*1 x HDMI to VGA adapter
*1 x USB Male to male adapter
*1 x Pack of plastic screws
This expansion board is suitable for Raspberry Pi Model B+;
Recommended Power Supplies : 110~240VAC input, 12V DC 2A output;
KEY FEATURES:
Input Voltage:
*6V to 23Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi;
VGA output:
*HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC;
RS232 serial communication:
*Control the Raspberry Pi over RS232 or connect to external serial accessories;
USB Storage:
*Self-powered USB hub with 3 ports;
Real-time clock (RTC):
*Based on DS3231SN with included CR2032 battery;
MicroSD Card Reader/Writer:
*Supports microSD / microSDHC / microSDXC;
*Convenient to write OS image;
Misc:
*Power output socket;
*Camera flex slot so camera can still be used with the expansion board attached;
*DIP switch to remove connection from RPi’s pin header;
*Directly connected on top of the Raspberry Pi using the board GPIO header pins;
*No wiring nor soldering is required;
*Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards;
Packing List
*1 x Expansion Board (Included 1 x CR2032 battery)
*1 x HDMI to VGA adapter
*1 x USB Male to male adapter
*1 x Pack of plastic screws