6,185
edits
Changes
Jump to navigation
Jump to search
==SAFETY INSTRUCTIONS AND WARNINGS==* <span style="color:red;">The default charging current is set to 1.5A and charge cut-off voltage is 4.23V. before connecting your battery to the {{Raspberry Pi 5 UPS board, Please carefully confirm the maximum charging current and voltage, exceeding the upper limit of the charging specification that the battery can withstand will not only cause adverse reactions, but may also cause irreversible damage.* <span style="color:red;">It is essential to read and understand these safety instructions and warnings before charging your batteries.* <span style="color:red;">Lithium Polymer and Li-ion batteries are volatile. Failure to read and follow the instructions below may result in fire, personal injury, and damage to property if charged or used improperly.* <span style="color:red;">Never make a wrong polarity connection when charging or discharging battery packs. Always double-check the polarity of the battery's connector to ensure that "+" is connected to "+" and "-" is connected to "-".* <span style="color:red;">Do not mix and use old batteries with new batteries, or batteries with different brand names.* <span style="color:red;">Lithium batteries have a limited cycle life. Please replace old batteries with new ones when they reach their service life or when they are two years old, whichever comes first.* <span style="color:red;">When charging the Battery Pack, please place the battery in a fireproof container. Do not leave the UPS shield on wood material or carpet unattended.* <span style="color:red;">Keep the UPS shield away from children to ensure their safety.Sets}}
'''Compatible Accessories'''
* X1100 USB3 to SATA 2.5 HDD/SSD shield for Pi 5
* Other add-on boards that do not use the PCIe interface are attached to the bottom of the Raspberry Pi.
{{GD Template Impl}}
[[File:X1208-IMG-9926-Interface.jpg|thumb|X1208 V1.0 Interface]]
[[File:X1208-IMG-0091-1.jpg|thumb|X1208 V1.0]]
[[File:X1208-IMG-0088.jpg|thumb|X1208 V1.0]]
[[File:X1208-IMG-0129.jpg|thumb|X1208 V1.0 with Raspberry Pi 5 ]]
[[File:X1208-IMG-0125-pogo-pin-connection.jpg|thumb|X1208 V1.0]]
[[File:X1208-IMG-0105-Power.jpg|thumb|X1208 V1.0 with Raspberry Pi 5 & SSD card]]
==SAFETY INSTRUCTIONS AND WARNINGS==
{{UPS Safety Warning}}
==Overview==
The X1208 UPS+POE M.2 NVMe Shield is engineered to provide the Raspberry Pi 5 with both a reliable power source and enhanced storage. It features an integrated M.2 NVMe SSD slot, ensuring robust data backup even during a power loss. This powerful combination safeguards valuable data, boosts system reliability, and guarantees continuous operation.
The X1208 delivers a stable 5.1 V/5 A backup power supply, enabling uninterrupted performance for demanding setups—from intensive applications to multiple peripherals. Its advanced power-management system intelligently monitors the Pi's status, automatically cutting power after shutdown to optimize battery life with ultra-low standby consumption. The board ensures seamless power switching during outages or adapter failures and supports convenient features such as auto power-on and AC power-loss detection.
==Features==
| '''Key Features''' ||
'''UPS Output'''
* Built for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi 5 systems* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi 5 applications
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
* Power the Pi 5 directly through the 40-pin header, eliminating the need for cables and soldering
'''Battery Charging'''
* Seamless power switching between backup power and the power adapter
* On-board push button performs the same actions as the Pi's power button
* Automatically cuts off power when the Pi 5 is shut down* On-board LED indicates power status and Pi 5 detection
* AC power loss and power adapter failure detection via GPIO
* Auto power-on when power is applied or restored
* High-efficiency converter delivers 3.5A to your SSD
|-
| '''Spec''' ||
* 40-pin extended GPIO header x1
'''PCB Size:''' 86.5mm x 84.5mm
|-
|''' Important Notes'''||
* Compatible with unprotected 21700 battery only (Max. battery length: 70.3 mm).
|-
|}
==Technical specification==
{| class="wikitable"
|-
| '''Power input''' ||
*5Vdc 5A via USB-C (Input current below 5A may cause improper operation)
|-
| '''UPS output''' ||
*5.1V ±5% Max 5A
|-
| '''Battery charging current''' ||
*1.5A
|-
| '''Terminal Battery Voltage''' ||
*4.23V
|-
| '''Battery Recharge Threshold''' ||
*4.1V
|-
| '''Ports & Connectors''' ||
*USB-C power in connector x1
*1-cell 21700 battery connector x1
*SSD socket - M.2 KEY-M 67P x1
*40-pin extended GPIO header x1
|-
| '''PCB Size''' ||
*86.5mm x 84.5mm
|}
* 4x M2.5x13.5mm F/F Spacers
* 1x Screw Kit
[[File:X1208-IMG-0015-Packing-List.jpg|550px]]
==Matching Case==
The [[X1207-C1]] is a premium metal case specially designed for the Raspberry Pi 5''' [[ X1207]]'''/[[X1208]] UPS Shield, offering robust protection in a sleek, black aesthetic.
* Case dimension: 92.8 x 90.8 x 42.8 mm
<gallery>
X1207-C1-IMG-0165-Packing List.jpg|X1207-C1 Accessories
X1207-C1-IMG-0167.jpg|X1207-C1
X1207-C1-IMG-0170.jpg|X1207-C1
X1207-C1-IMG-0174.jpg|X1207-C1
</gallery>
==User Manual==
* X1208 Hardware InstallationGuide: [https://suptronics.com/Raspberrypi/Power_mgmt/x1208-v1.0_hardware.html X1208 Hardware]* How to make it workX1208 Software Guide:[https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1208 Software]
==FAQ==