3,350
edits
Changes
| '''Key Features''' ||
'''UPS Output'''
* Built for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi 5 systems* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi 5 applications
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
* Power the Pi 5 directly through the 40-pin header, eliminating the need for cables and soldering
'''Battery Charging'''
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over I2C
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
* Features '''a single 21700 battery holder''', supporting a battery of up to 5000mAh(Compatible only with '''unprotected 21700 battery''' up to 70.3 mm in length.)
'''Power Input'''
* Seamless power switching between backup power and the power adapter
* On-board push button performs the same actions as the Pi's power button
* Automatically cuts off power when the Pi 5 is shut down* On-board LED indicates power status and Pi 5 detection
* AC power loss and power adapter failure detection via GPIO
* Auto power-on when power is applied or restored
'''Compatible Accessories'''
* [[X1100 ]] USB3 to SATA 2.5 HDD/SSD shield for Pi 5* Other add-on boards that do not use the PCIe interface are attached to the bottom of the Raspberry Pi5.
|-
| '''Spec''' ||
'''PCB Size:''' 86.5mm x 84.5mm
|-
|''' Important Notes'''||* Do not apply power to your Raspberry Pi 5 via the Type-C USB socket.* Compatible with unprotected 21700 battery only (Max. battery length: 70.3 mm).
|-
|}
* 4x M2.5x13.5mm F/F Spacers
* 1x Screw Kit
==Matching Case==
There is no matching case for X1208 right now! Please looking forward to the future update.
==User Manual==
* X1208 Hardware InstallationGuide: * How to make it workX1208 Software Guide:[https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1208 Software]
==FAQ==