3,350
edits
Changes
==Features==
{| class="wikitable"
|-
| '''For use with''' ||
Raspberry Pi 5
|-
| '''Key Features''' ||
'''UPS Output'''
* Built for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi systems
* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi applications
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
* Power the Pi directly through the 40-pin header, eliminating the need for cables and soldering
'''Battery Charging'''
* Supports battery charging with a capacity of 1500mA
* Battery charging control can be managed via GPIO
* Provides protection against battery overcurrent and overvoltage
* Built-in protection against reverse connection of battery cells
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over I2C
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
* Features a single 21700 battery holder, supporting a battery of up to 5000mAh
'''Power Input'''
* Powered through the USB-C socket, eliminating the need to change your power adapter
'''Enhanced Power Management'''
* Seamless power switching between backup power and the power adapter
* On-board push button performs the same actions as the Pi's power button
* Automatically cuts off power when the Pi is shut down
* On-board LED indicates power status and Pi detection
* AC power loss and power adapter failure detection via GPIO
* Auto power-on when power is applied or restored
* Automatic safe shutdown when battery voltage is low (programmable)
* Ultra-low standby power consumption to maximize battery life
* Advanced system power-path management to minimize frequent charging and discharging of batteries
'''M.2 M key NVMe socket'''
* Supports high-capacity M.2 NVMe solid-state drives up to 4TB
* Accommodates various M.2 NVMe SSD form factors, including 2280, 2242, and 2230
* Supports operating system booting from your SSD
* Offers fast data transfer speeds with PCIe 2.0 5Gbps / PCIe 3.0 8Gbps
* Does not compromise cooling performance and is fully compatible with the official active cooler
* Features a blue LED indicator that displays power and drive status
* High-efficiency converter delivers 3.5A to your SSD
'''Compatible Accessories'''
* X1100 USB3 to SATA 2.5 HDD/SSD shield for Pi 5
* Other add-on boards that do not use the PCIe interface are attached to the bottom of the Raspberry Pi.
|-
| '''Spec''' ||
<span style="color:red">'''Power input:''' 5Vdc 5A via USB-C (Input current below 5A may cause improper operation.)</span>
'''UPS output:''' 5.1V ±5% Max 5A
'''Battery charging current:''' 1.5A
'''Terminal Battery Voltage:''' 4.23V
'''Battery Recharge Threshold:''' 4.1V
'''Ports & Connectors:'''
* USB-C power in connector x1
* 1-cell 21700 battery connector x1
* SSD socket - M.2 KEY-M 67P x1
* 40-pin extended GPIO header x1
'''PCB Size:''' 86.5mm x 84.5mm
|-
|}
==Packing List==