6,185
edits
Changes
Jump to navigation
Jump to search
{{GD Template Impl}}
[[File:X1208-IMG-9926-Interface.jpg|thumb|X1208 V1.0 Interface]]
[[File:X1208-IMG-0091-1.jpg|thumb|X1208 V1.0]]
[[File:X1208-IMG-0088.jpg|thumb|X1208 V1.0]]
[[File:X1208-IMG-0129.jpg|thumb|X1208 V1.0 with Raspberry Pi 5 ]]
[[File:X1208-IMG-0125-pogo-pin-connection.jpg|thumb|X1208 V1.0]]
[[File:X1208-IMG-0105-Power.jpg|thumb|X1208 V1.0 with Raspberry Pi 5 & SSD card]]
==SAFETY INSTRUCTIONS AND WARNINGS==
{{UPS Safety Warning}}
==Overview==
The X1208 UPS+POE M.2 NVMe Shield is engineered to provide the Raspberry Pi 5 with both a reliable power source and enhanced storage. It features an integrated M.2 NVMe SSD slot, ensuring robust data backup even during a power loss. This powerful combination safeguards valuable data, boosts system reliability, and guarantees continuous operation.
The X1208 delivers a stable 5.1 V/5 A backup power supply, enabling uninterrupted performance for demanding setups—from intensive applications to multiple peripherals. Its advanced power-management system intelligently monitors the Pi's status, automatically cutting power after shutdown to optimize battery life with ultra-low standby consumption. The board ensures seamless power switching during outages or adapter failures and supports convenient features such as auto power-on and AC power-loss detection.
{{Raspberry Pi 5 UPS Sets}}
==Features==
{| class="wikitable"
|-
| '''For use with''' ||
Raspberry Pi 5
|-
| '''Key Features''' ||
'''UPS Output'''
* Built for continuous, long-lasting operation -providing unwavering power for always-on Raspberry Pi 5 systems
* Supports a maximum current output of 5.1V 5000mA, suitable for most Raspberry Pi 5 applications
* Integrated Advanced Power MOSFET with an equivalent of 7mΩ RDS(ON) to minimize power loss
* Power the Pi 5 directly through the 40-pin header, eliminating the need for cables and soldering
'''Battery Charging'''
* Supports battery charging with a capacity of 1500mA
* Battery charging control can be managed via GPIO
* Provides protection against battery overcurrent and overvoltage
* Built-in protection against reverse connection of battery cells
* Integrated Maxim's fuel-gauge systems for reading battery voltage and percentage over I2C
* On-board LEDs indicate battery charging and discharging levels of 25%, 50%, 75%, and 100%
* Features '''a single 21700 battery holder''', supporting a battery of up to 5000mAh(Compatible only with '''unprotected 21700 battery''' up to 70.3 mm in length.)
'''Power Input'''
* Powered through the USB-C socket, eliminating the need to change your power adapter
'''Enhanced Power Management'''
* Seamless power switching between backup power and the power adapter
* On-board push button performs the same actions as the Pi's power button
* Automatically cuts off power when the Pi 5 is shut down
* On-board LED indicates power status and Pi 5 detection
* AC power loss and power adapter failure detection via GPIO
* Auto power-on when power is applied or restored
* Automatic safe shutdown when battery voltage is low (programmable)
* Ultra-low standby power consumption to maximize battery life
* Advanced system power-path management to minimize frequent charging and discharging of batteries
'''M.2 M key NVMe socket'''
* Supports high-capacity M.2 NVMe solid-state drives up to 4TB
* Accommodates various M.2 NVMe SSD form factors, including 2280, 2242, and 2230
* Supports operating system booting from your SSD
* Offers fast data transfer speeds with PCIe 2.0 5Gbps / PCIe 3.0 8Gbps
* Does not compromise cooling performance and is fully compatible with the official active cooler
* Features a blue LED indicator that displays power and drive status
* High-efficiency converter delivers 3.5A to your SSD
|-
| '''Spec''' ||
<span style="color:red">'''Power input:''' 5Vdc 5A via USB-C (Input current below 5A may cause improper operation.)</span>
'''UPS output:''' 5.1V ±5% Max 5A
'''Battery charging current:''' 1.5A
'''Terminal Battery Voltage:''' 4.23V
'''Battery Recharge Threshold:''' 4.1V
'''Ports & Connectors:'''
* USB-C power in connector x1
* 1-cell 21700 battery connector x1
* SSD socket - M.2 KEY-M 67P x1
* 40-pin extended GPIO header x1
'''PCB Size:''' 86.5mm x 84.5mm
|-
|''' Important Notes'''||
* Do not apply power to your Raspberry Pi 5 via the Type-C USB socket.
* Compatible with unprotected 21700 battery only (Max. battery length: 70.3 mm).
|-
|}
==Technical specification==
{| class="wikitable"
|-
| '''Power input''' ||
*5Vdc 5A via USB-C (Input current below 5A may cause improper operation)
|-
| '''UPS output''' ||
*5.1V ±5% Max 5A
|-
| '''Battery charging current''' ||
*1.5A
|-
| '''Terminal Battery Voltage''' ||
*4.23V
|-
| '''Battery Recharge Threshold''' ||
*4.1V
|-
| '''Ports & Connectors''' ||
*USB-C power in connector x1
*1-cell 21700 battery connector x1
*SSD socket - M.2 KEY-M 67P x1
*40-pin extended GPIO header x1
|-
| '''PCB Size''' ||
*86.5mm x 84.5mm
|}
==Packing List==
* 1x X1208 V1.0 UPS + NVMe Board
* 2x PCIe FFC Cable (40mm length)
* 1x Pogo Pin (for connecting to the Pi 5 PSW through-hole)
* 4x M2.5x13.5mm F/F Spacers
* 1x Screw Kit
[[File:X1208-IMG-0015-Packing-List.jpg|550px]]
==Matching Case==
The [[X1207-C1]] is a premium metal case specially designed for the Raspberry Pi 5''' [[ X1207]]'''/[[X1208]] UPS Shield, offering robust protection in a sleek, black aesthetic.
* Case dimension: 92.8 x 90.8 x 42.8 mm
<gallery>
X1207-C1-IMG-0165-Packing List.jpg|X1207-C1 Accessories
X1207-C1-IMG-0167.jpg|X1207-C1
X1207-C1-IMG-0170.jpg|X1207-C1
X1207-C1-IMG-0174.jpg|X1207-C1
</gallery>
==User Manual==
* X1208 Hardware InstallationGuide: [https://suptronics.com/Raspberrypi/Power_mgmt/x1208-v1.0_hardware.html X1208 Hardware]* How to make it workX1208 Software Guide:[https://suptronics.com/Raspberrypi/Power_mgmt/x120x-v1.0_software.html X1208 Software]
==FAQ==